4-1415539-8 Power Relays, Over 2 Amps by TE Connectivity

Indicates the floor life of a component before it must be baked prior to soldering. Higher levels require stricter handling and shorter exposure times. Verify the MSL rating in the datasheet to ensure proper storage and assembly conditions.

Indicates whether the component complies with the EU RoHS directive restricting hazardous substances. Buyers should verify this status for regulatory compliance and market access. Check the datasheet or certificate for exact compliance details.

Harmonized Tariff Schedule of the United States code for customs classification. Essential for import/export documentation and duty calculation. Verify the correct code with a trade specialist to avoid customs delays.

Lifecycle status of the part, such as active or obsolete. Indicates availability and long-term support from the manufacturer. Check this before design-in to avoid last-time buys or supply disruptions. Verify with the datasheet or distributor for current status.

Identifies the company that designed and produced the component. Buyers often filter by manufacturer to ensure brand reliability, quality standards, and supply chain consistency. Verify the manufacturer against the datasheet and official packaging to avoid counterfeit parts.

Export Control Classification Number assigned by the U.S. government. Determines whether the component requires an export license. Essential for international trade compliance. Verify the ECCN with the manufacturer or supplier before shipping to avoid legal issues.

Shows whether the component complies with the EU REACH regulation. Essential for legal market access in Europe. Check the manufacturer's latest statement to confirm that no substances of very high concern are present above the threshold.

Current stage in the product's lifecycle, such as Active, Obsolete, or End of Life. This indicates availability and long-term supply risk. Check this before designing in a part to ensure it will be available for your product's production lifetime.

Indicates the specific product subcategories or classifications within the broader component family. Helps narrow down search results and identify the exact type of component needed for your design. Review the subcategory to ensure compatibility with your application.

Lists the product categories or classifications assigned to this component, such as connectors, capacitors, or modules. This helps in filtering and comparing similar parts. Review the categories to ensure the component fits your application and to find alternative parts in the same class.

Indicates the product series or family, grouping components with similar design and specifications. Helps identify compatible parts and compare within a product line. Verify the series against the datasheet to ensure correct application.

Specifies the maximum alternating current voltage that the contact is designed to withstand continuously. Compare this rating with your application's operating voltage to ensure reliable insulation and prevent arcing. Always verify against the datasheet for derating factors and safety margins.

Specifies the permissible ambient temperature range for reliable operation. Compare this class with your application's environmental conditions to ensure the component will function within its thermal limits. Always verify against the datasheet's derating curves and maximum ratings.

Maximum DC voltage the relay or switch contacts can safely switch. Exceeding this limit may cause arcing or contact damage. Verify against datasheet for your load type and expected lifetime.

Specifies the magnetic circuit configuration inside the relay coil, such as polarized or non-polarized. This affects sensitivity, response time, and contact performance. Verify the type against the datasheet to ensure compatibility with your drive circuit and switching requirements.

Indicates the relay's design or application category, such as latching, automotive, or PCB. This helps engineers select the correct switching mechanism for their circuit. Verify the type against the datasheet to ensure compatibility with your load and control voltage.

Specifies the mechanism that moves the relay contacts between open and closed states. Common types include electromagnetic, thermal, and solid-state. Verify the actuating system against your application's switching speed and drive requirements to ensure reliable operation.

Indicates unique coil characteristics like latching or sealed construction. These features affect relay or solenoid behavior, power consumption, and environmental protection. Verify against datasheet to ensure compatibility with your circuit design and operating conditions.

Minimum physical distance separating the relay contact from the coil winding. Ensures electrical isolation and prevents arcing or breakdown. Critical for safety in high-voltage applications. Verify against datasheet for compliance with insulation standards.

Specifies the maximum DC voltage the contact can safely withstand. Compare this rating with your circuit's operating voltage to ensure reliable isolation and prevent arcing. Always verify against the datasheet for derating factors and environmental conditions.

Specifies the physical layout and electrical configuration of contacts within a connector or relay. This determines mating compatibility, pin assignment, and circuit routing. Verify against the datasheet to ensure correct wiring and avoid short circuits.

Specifies the rated current class of the contact in amperes. Compare this value with your application's load requirements to ensure reliable operation. Verify against the datasheet for exact ratings and derating conditions.

Indicates the component's environmental protection rating, such as sealed, washable, or moisture-resistant. Compare ratings when selecting parts for harsh or humid environments. Verify the specific category against the datasheet to ensure compatibility with your manufacturing and operating conditions.

Specifies the minimum and maximum ambient temperatures at which the component functions reliably. Critical for automotive, industrial, and outdoor applications. Always verify that the range covers your application's thermal extremes to prevent premature failure or performance degradation.

The weight of the component in grams, useful for logistics, mechanical design, and weight-sensitive applications. Compare weights when evaluating similar parts for assembly or shipping cost calculations. Verify the value in the datasheet if precise weight is critical for your design.

The color of the component's case or housing, which may be relevant for visual identification, aesthetics, or optical sensors. Not a functional parameter but can aid in distinguishing variants. Check the datasheet for color options if appearance matters in your application.

The height classification of the component in millimeters, essential for PCB clearance and enclosure design. Ensure the height fits within your mechanical constraints. Compare height classes when selecting parts for compact or low-profile assemblies. Verify dimensions in the datasheet.

The maximum continuous current that the contacts can carry without overheating or damage. Critical for relays, connectors, and switches. Ensure the current rating exceeds your application's steady-state current. Verify the value in the datasheet to prevent contact failure.

The DC input voltage required for the component to operate correctly. Essential for power supplies, modules, and drivers. Ensure your power source matches the specified voltage range. Verify the input voltage in the datasheet to avoid damage or malfunction.

The maximum current that the contacts can safely break without arcing or damage. Critical for switches, relays, and circuit breakers. Ensure the breaking current rating exceeds your application's maximum load current. Verify the value in the datasheet to ensure reliable switching.

The maximum ambient temperature at which the component can operate without exceeding its thermal limits. Important for thermal management and reliability. Ensure your application's maximum ambient temperature is below this rating. Verify the value in the datasheet to prevent overheating.

The configuration of the switch contacts, such as SPST, SPDT, DPDT. Determines the switching logic and circuit connections. Choose the arrangement that matches your control requirements. Verify the contact configuration in the datasheet to ensure proper circuit operation.

Creepage distance is the shortest path along the insulating surface between the contact and coil. It determines the relay's ability to withstand voltage surges and pollution. Verify this value against the datasheet for your application's safety requirements.

Specifies how the relay connects to the circuit board, such as through-hole, surface mount, or screw terminal. This affects assembly methods, mechanical strength, and repairability. Choose the termination type that matches your PCB design and manufacturing process.

This is the initial dielectric withstand voltage between the coil and contacts, expressed in volts. It indicates the relay's insulation strength against overvoltages. Ensure this rating meets your circuit's isolation requirements to prevent breakdown and ensure safety.

The mechanical length classification of the component in millimeters. This dimension is critical for PCB layout and enclosure design. Verify that the length fits your board space and does not interfere with adjacent components or mounting holes.

The mechanical width classification of the component in millimeters. This dimension is essential for board layout and ensuring proper clearance from other parts. Check that the width fits your design constraints and does not cause assembly issues.

Approximate length, width, and height of the component in millimeters. These dimensions help estimate space requirements on the PCB and in the final assembly. Always confirm exact dimensions from the datasheet for precise mechanical design.

Overall physical length of the component in millimeters. Verify against the datasheet for board layout and mechanical fit. Critical for connectors, modules, and passives where space is constrained.

The rated DC voltage for the relay coil. This is the voltage at which the relay is designed to operate reliably. Ensure your supply voltage matches this rating to avoid coil damage or unreliable switching. Check the datasheet for tolerance and operating range.

Clearance distance is the shortest air gap between conductive parts, measured in millimeters. It affects the relay's ability to withstand voltage spikes and prevent arcing. Verify this clearance meets your safety standards and operating environment requirements.

The maximum short-time current that the relay contacts can withstand without damage. This is important for applications with inrush currents or transient overloads. Ensure this rating exceeds your peak current demands to prevent contact welding or degradation.

Indicates the type of output switching the relay supports, such as AC, DC, or universal. This determines the relay's suitability for your load type. Choose a relay that matches your circuit's voltage and current characteristics to ensure reliable operation.

This is the initial RMS voltage that the insulation between the relay contacts and coil can withstand without breakdown. It is a key safety parameter for isolation integrity. Verify this value against the datasheet when designing for high-voltage applications or when ensuring compliance with safety standards.

This is the DC power consumed by the relay coil when energized, expressed in milliwatts. It determines the drive requirements and heat dissipation of the relay. Compare this value with your power budget and ensure the coil driver can supply the necessary current without exceeding the relay's thermal limits.

Specifies the physical style of the terminal used for electrical connection, such as screw, crimp, solder, or quick disconnect. This affects mounting, wiring method, and compatibility with mating connectors. Verify the terminal type against your application requirements and the datasheet to ensure secure and reliable connections.

This is the initial dielectric withstand voltage between the relay contacts and the coil, expressed in volts. It indicates the insulation strength at first use. Verify this value against the datasheet to ensure the relay can handle expected voltage stresses without breakdown.

This is the maximum current that the relay contacts can safely make or close without damage. It is critical for applications with inrush currents, such as motors or capacitive loads. Always compare this rating with the actual inrush current in your circuit to prevent contact welding.

Specifies the metal alloy used for the electrical contact surfaces, affecting conductivity, wear resistance, and corrosion behavior. Compare materials like silver, gold, or palladium for signal integrity and durability. Verify against datasheet for application-specific requirements.

This is the initial dielectric withstand voltage between the open contacts of the relay, expressed in RMS volts. It indicates the insulation capability when the contacts are separated. Check this rating against your circuit's voltage levels to ensure safe isolation when the relay is off.

Specifies the metal coating on relay or connector contacts, affecting conductivity, corrosion resistance, and durability. Common materials include gold, silver, and tin. Verify against datasheet for high-cycle or harsh-environment applications.

Current drawn by the relay coil at rated voltage. Determines power consumption and drive circuit requirements. Check this value to ensure your power supply and driver can handle the load, especially in battery-powered or high-density designs.

Indicates how the relay is physically mounted on the PCB or panel, such as through-hole, surface mount, or socket. Affects assembly process, mechanical stability, and serviceability. Choose based on your manufacturing and maintenance requirements.

Creepage distance in millimeters between conductive parts along the insulation surface. Critical for safety and reliability in high-voltage or humid environments. Verify this value against your application's required clearance and pollution degree.

Physical dimensions of the relay base in millimeters, including length and width. Essential for PCB layout and enclosure design. Ensure these dimensions match your mounting footprint and available space to avoid assembly issues.

Specifies the maximum continuous current the contacts can safely carry without overheating or degradation. Compare this rating with your circuit's expected load to ensure reliable operation. Always verify against the datasheet for derating curves and ambient temperature conditions.

Defines the power consumption class of the relay coil in milliwatts. This affects drive circuit design and thermal management. Choose a coil power class that matches your control voltage and minimizes heat generation. Verify with datasheet for coil resistance and pull-in voltage.

Indicates the minimum load current or voltage that the contacts can reliably switch without failure. This is critical for low-level signal switching where oxidation or contamination may prevent proper operation. Ensure your application's minimum load exceeds this value to avoid intermittent connections.

Physical width of the component in millimeters, essential for PCB layout and mechanical fit. Verify this dimension against your board space and enclosure constraints. Consider tolerance and mounting method when designing footprints. Always check the datasheet for exact dimensions and recommended pad patterns.

Lists unique characteristics or options of the contacts, such as gold plating, bifurcated design, or low-level switching capability. These features affect reliability and suitability for specific applications. Review this attribute to ensure the contact material and design meet your environmental and performance requirements.

DC resistance of the relay coil in ohms. It determines coil power consumption and drive voltage compatibility. Check the datasheet to match the coil resistance with your driver circuit and ensure reliable switching.

Maximum AC voltage that the relay contacts can safely switch. Exceeding this rating may cause arcing or insulation failure. Verify against your load voltage and consider derating for inductive loads.

Overall physical height of the component in millimeters, measured from the mounting surface to the highest point. This dimension is critical for board clearance and enclosure fit. Always verify against the datasheet for exact tolerances.

Specifies the nominal power consumed by the relay coil when energized. Compare this value with the driver capability and supply voltage to ensure reliable switching. Verify against the datasheet for exact coil resistance and tolerance.

Indicates the number of independent contact sets in a switch, relay, or connector. Compare this when selecting components for multi-circuit control. Verify against the datasheet to ensure the pole count matches your application requirements.

Describes how the component is packaged for shipment, such as tape and reel, tube, or tray. This affects automated assembly and inventory handling. Confirm the packaging method with your production needs and the datasheet before ordering.

The unique part number assigned by the original component manufacturer. Use this to cross-reference datasheets, verify specifications, and ensure the exact component matches your design requirements. Always confirm the number against the manufacturer's official documentation.