TrustCompo Website Logo | TrustCompo
Maxim IntegratedIntegrated Circuits (ICs)Embedded - MicrocontrollersMaxim Integrated Embedded - Microcontrollers

DS80C400-FNY+ Embedded - Microcontrollers by Maxim Integrated

DS80C400-FNY+ is a Embedded - Microcontrollers model from Maxim Integrated, presented on TrustCompo for buyers who need clear sourcing and review context before RFQ. This listing sits in the Integrated Circuits (ICs) / Embedded - Microcontrollers product path. Known package information currently points to LQFP under the Maxim Integrated brand listing. IC MCU 8BIT 64KB ROM 100LQFP. TrustCompo combines the available model, brand, hierarchy, and specification details around DS80C400-FNY+ so buyers can move faster from review to quotation.

RoHS
Datasheet
DS80C400-FNY+ Embedded - Microcontrollers by Maxim Integrated | TrustCompo
Pictures are for reference only. Please contact us for the latest pictures.

Traceability and authenticity checks

Fast RFQ turnaround

Documentation support

Pre-shipment inspection review

Part Number

DS80C400-FNY+

Internal code

TCE000120084

Package

LQFP

Manufacturer

Maxim Integrated

Key specifications

Series

80C

Min Quantity

1

Category

Integrated Circuits (ICs)

Sub Category

Embedded - Microcontrollers

Description

IC MCU 8BIT 64KB ROM 100LQFP

key Attributes

-

Datasheet

View DS80C400-FNY+ Datasheet

Technical document

Open The Official Datasheet

Review the latest datasheet for DS80C400-FNY+ from Maxim Integrated in a separate tab so engineers and buyers can check package, electrical characteristics, and application details without leaving this product page.

View DS80C400-FNY+ Datasheet

Why request a quote

Use the RFQ step to confirm the commercial and documentation details buyers usually need before placing an order.

RoHS, REACH, and lead-free documentation can be confirmed during RFQ
Traceability and Certificate of Conformance support available on request
Pre-shipment inspection report support for quality review

Trust signals

Globally recognized certifications

4 certifications

Visible certifications work best when they are paired with clear operational promises around traceability, handling, and inspection.

ISO 9001

Quality management processes for more consistent sourcing and handling.

AS9120B

Aerospace-focused distribution controls for traceability and reliability.

ISO 14001

Environmental management discipline across warehouse and operating workflows.

ESD Control

Electrostatic handling standards to help protect sensitive components.

Ordering workflow

Understand how to order and what policies support the purchase

Use this section to see the fastest ordering path and the policy pages buyers usually review before confirming a component order.

How to order this product

A simple B2B flow helps engineering and procurement teams move from part review to commercial confirmation.

1

Confirm part and quantity

Review the part number, package, key specs, and target quantity so the quote request reflects the exact sourcing scope your team needs.

2

Send RFQ or sample request

Use Quick Quote for commercial pricing or Request Sample when engineering validation is still in progress and a smaller evaluation quantity is needed.

3

Align delivery, payment, and documentation

Before final release, confirm stock timing, shipment method, payment arrangement, and any traceability or inspection documents required by your process.

Policies buyers usually check

These pages explain the operating rules around samples, shipping, payment, and quality support before you place the order.

Get a Sample

Request engineering samples to evaluate fit, validate alternatives, and keep design decisions moving before a larger order is placed.

Request evaluation samples

Shipping & Delivery

Review shipping origin, carrier options, delivery methods, and the practical factors that affect transit timing for global component orders.

Review shipping details

Payment Terms

Understand supported payment methods, invoice handling, quote currency, and the commercial boundaries used for international B2B orders.

Review payment terms

Quality & Traceability Center

See how incoming inspection, outgoing verification, traceability support, certifications, and additional testing fit into our quality workflow.

Review quality controls

Structured product content

Review The Product The Way Buyers Actually Evaluate It

Review overview, detailed specifications, and related sourcing content in one structured flow without scanning separate oversized sections.

Product overview

Overview

GENERAL
The DS80C400 network microcontroller offers the highest integration available in an 8051 device. Peripherals include a 10/100 Ethernet MAC, three serial ports, a CAN 2.0B controller, 1-Wire® Master, and 64 I/O pins.
FEATURES
• High-Performance Architecture Single 8051 Instruction Cycle in 54ns DC to 75MHz Clock Rate Flat 16MB Address Space Four Data Pointers with Auto-Increment/ Decrement and Select-Accelerate Data Movement 16/32-Bit Math Accelerator
• Multitiered Networking and I/O 10/100 Ethernet Media Access Controller (MAC) CAN 2.0B Controller 1-Wire Net Controller Three Full-Duplex Hardware Serial Ports Up to Eight Bidirectional 8-Bit Ports (64 Digital I/O Pins)
• Robust ROM Firmware Supports Network Boot Over Ethernet Using DHCP and TFTP Full, Application-Accessible TCP/IP Network Stack Supports IPv4 and IPv6 Implements UDP, TCP, DHCP, ICMP, and IGMP Preemptive, Priority-Based Task Scheduler MAC Address can Optionally be Acquired from IEEE Registered DS2502-E48
• 10/100 Ethernet MAC Flexible IEEE 802.3 MII (10/100Mbps) and ENDEC (10Mbps) Interfaces Allow Selection of PHY Low-Power Operation Ultra-Low-Power Sleep Mode with Magic Packet® and Wake-Up Frame Detection 8kB On-Chip Tx/Rx Packet Data Memory with Buffer Control Unit Reduces Load on CPU Half- or Full-Duplex Operation with Flow Control Multicast/Broadcast Address Filtering with VLAN Support
• Full-Function CAN 2.0B Controller 15 Message Centers Supports Standard (11-Bit) and Extended (29-Bit) Identifiers and Global Masks Media Byte Filtering to Support DeviceNet™, SDS, and Higher Layer CAN Protocols Auto-Baud Mode and SIESTA Low-Power Mode
• Integrated Primary System Logic 16 Total Interrupt Sources with Six External Four 16-Bit Timer/Counters 2x/4x Clock Multiplier Reduces Electromagnetic Interference (EMI) Programmable Watchdog Timer Oscillator-Fail Detection Programmable IrDA Clock

Fast scan

Popular Specs Surfaced First

Product Parameter

Terminal Finish

Matte Tin (Sn)

Product Parameter

RAM Size

1K x 8

Product Parameter

UPs/UCs/Peripheral ICs Type

MICROCONTROLLER

Product Parameter

Supply Voltage-Min (Vsup)

1.62V

Product Parameter

Voltage - Supply (Vcc/Vdd)

1.62V~3.6V

Product Parameter

Bit Size

8

Terminal Finish
Matte Tin (Sn)
RAM Size
1K x 8
UPs/UCs/Peripheral ICs Type
MICROCONTROLLER
Supply Voltage-Min (Vsup)
1.62V
Voltage - Supply (Vcc/Vdd)
1.62V~3.6V
Bit Size
8
DMA Channels
NO
Oscillator Type
External
Has ADC
NO
Time@Peak Reflow Temperature-Max (S)
30
Number Of UART Channels
3
Output Voltage-Nom (FM)
8-Bit
Core Size
64KB 64K x 8
Peripherals
Power-Fail Reset, WDT
Mfr
8051
Supply Voltage-Max (Vsup)
1.98V
Speed
ROM
Core Processor
1-Wire®, CANbus, EBI/EMI, Ethernet, SIO, UART/USART
Height Seated (Max)
1.6mm
JESD-609 Code
e3
RoHS Status
ROHS3 Compliant
Moisture Sensitivity Level (MSL)
3 (168 Hours)
JESD-30 Code
S-PQFP-G100
ECCN Code
5A991.B
Packaging
Tray
Lead Free
Lead Free
Mounting Type
Surface Mount
Published
2005
Part Status
Obsolete
Categories
Integrated Circuits (ICs)
Peak Reflow Temperature (Cel)
260
Terminal Form
GULL WING
Technology
CMOS
Qualification Status
Not Qualified
Terminal Position
QUAD
Terminal Pitch
0.5mm
Operating Temperature
-40°C~85°C TA
Subcategory
Microcontrollers
Sub-Categories
Embedded - Microcontrollers
Package / Case
100-LQFP
Manufacturer
Maxim Integrated
Surface Mount
YES
Pbfree Code
yes
Address Bus Width
16
Supply Voltage
1.8V
Pin Count
100
Number Of Terminations
100
Width
14mm
Length
14mm
Number Of I/O
64
External Data Bus Width
8
Series
80C
Clock Frequency
75MHz
Base Part Number
DS80C400
Manufacturer'S Part No.
DS80C400-FNY+
Output Voltage-Nom (AM)
75MHz

Common questions

Product FAQ

Quick answers for buyers reviewing DS80C400-FNY+, stock, documentation, and sourcing steps.

What is DS80C400-FNY+?

DS80C400-FNY+ is a Embedded - Microcontrollers component from Maxim Integrated. This product page summarizes the core sourcing details buyers need before checking price, availability, documentation, or samples.

What package and description are listed for DS80C400-FNY+?

DS80C400-FNY+ is listed with package reference LQFP. The current product description is IC MCU 8BIT 64KB ROM 100LQFP, and buyers should confirm package, footprint, and electrical details against the datasheet or quotation notes before approval.

Is DS80C400-FNY+ available in stock?

This page currently shows 20877 units in stock and 16906 units available for DS80C400-FNY+. Because electronic component availability can change quickly, submit an RFQ to confirm live stock, lead time, and final pricing.

Can I request a quote or sample for DS80C400-FNY+?

Yes. Use the Quick Quote or Request Sample action on this page to send the quantity and sourcing requirements for DS80C400-FNY+ by Maxim Integrated. The TrustCompo team can review price, availability, and documentation support.

Is a datasheet available for DS80C400-FNY+?

Yes. This page links to the datasheet for DS80C400-FNY+ by Maxim Integrated, so engineers and buyers can review package, ratings, and application details before purchase.

How should buyers verify DS80C400-FNY+ before ordering?

Buyers should confirm the manufacturer, package, quantity, target price, RoHS or compliance needs, and any Certificate of Conformance or traceability requirements for DS80C400-FNY+ before approving the order.

More sourcing insights

Articles

Explore related articles around DS80C400-FNY+, Embedded - Microcontrollers, and adjacent sourcing decisions so buyers can compare context before moving from evaluation to RFQ.