KINO-PV-D5252-L2-R10 Single Board Computers (SBCs) by IEI Integration Corp

Indicates whether the component includes a watchdog timer and its type. This timer resets the system if software hangs, improving reliability. Verify the timeout period and enable/disable options in the datasheet for your application.

Indicates the SATA interface support on the component. Verify the SATA revision and port configuration against the datasheet to ensure compatibility with your storage devices and system design.

Specifies whether the board includes an integrated Ethernet controller. Check the datasheet for supported speeds, PHY type, and interface to ensure it meets your network connectivity requirements.

Indicates support for the Parallel ATA interface, a legacy storage connection standard. Verify compatibility with your system's controller and cable type. Important for industrial or embedded designs using older drives or specific data transfer requirements.

Indicates whether the component or board supports the Accelerated Graphics Port interface. Check this attribute when selecting graphics cards or motherboards for legacy systems. Verify compatibility with your system's AGP slot version and power requirements.

Indicates support for the RS-422 serial communication standard, used for reliable data transmission over long distances. Verify the transceiver type and data rate in the datasheet to ensure compatibility with your system's requirements.

Specifies the expansion slot types compatible with this component, such as PCIe, M.2, or DIMM. Verify against your motherboard or system to ensure proper fit and signal compatibility before ordering.

Specifies the serial communication protocols supported by the component, such as RS232, RS422, or RS485. This determines compatibility with your system's UART or transceiver requirements. Verify the exact interface variants and signal levels in the datasheet before integration.

Specifies the number of PCIe x1 expansion slots available on the board. Verify the PCIe generation and lane configuration in the datasheet to ensure compatibility with your add-in cards and bandwidth needs.

Indicates the number of PCIe x3 expansion slots available on the board or system. Verify this count against the product datasheet to ensure it meets your required number of high-speed peripheral connections for add-in cards or controllers.

Indicates whether the component is designed for CompactPCI bus systems. Check this attribute to ensure compatibility with your backplane and system architecture. Verify against the datasheet for specific bus interface support and signaling standards.

Indicates whether the product supports PCI-X bus slots, a legacy high-bandwidth variant of PCI. Check this attribute when integrating with older server or workstation peripherals, and confirm compatibility with your system's bus architecture and voltage requirements.

Specifies the type of video input interface supported by the component, such as composite, S-Video, or HDMI. Use this to ensure the product can accept video signals from your source device, and verify signal format and connector type in the datasheet.

Specifies the physical socket or slot used to install system memory modules on a motherboard or embedded board. This determines compatibility with specific RAM form factors like DIMM, SO-DIMM, or proprietary modules. Verify against the board's memory specification before ordering.

Indicates support for UART interface. This is a common asynchronous serial protocol for communication between microcontrollers and peripherals. Check this attribute to ensure compatibility with your system's serial communication requirements.

Indicates whether the component or module supports PCMCIA cards, a standard for expansion cards in portable devices. Verify compatibility with your system's card slot and bus interface. Check the datasheet for supported card types and electrical specifications.

Maximum voltage that can be applied to the input without causing damage or malfunction. Exceeding this limit may lead to breakdown or reduced reliability. Always compare with your supply voltage and check the datasheet for absolute maximum ratings.

Specifies the model or series of the processor, such as ARM Cortex-M4 or Intel Atom. This determines the instruction set, performance, and software compatibility. Verify the exact part number and revision against the datasheet to ensure it meets your application's processing requirements.

Indicates whether the memory module or controller supports error-correcting code (ECC) for detecting and correcting data corruption. Verify this attribute against the datasheet when designing systems that require high reliability, such as servers or workstations, to ensure data integrity.

Specifies the required power supply configuration, such as AC-DC, DC-DC, or external adapter. Essential for matching the component to your system's power architecture. Verify against the datasheet to ensure correct voltage and current ratings.

Indicates whether the system includes an integrated graphics solution, eliminating the need for a discrete GPU. Relevant for embedded systems, industrial PCs, and low-power applications. Check the datasheet for supported outputs and performance to ensure it meets your display requirements.

Indicates how many Ethernet ports are available on the card for network connections. Compare this when selecting a card for multi-port applications. Verify the exact port count and type against the datasheet before integration.

Lists the product categories or classifications assigned to this component, such as connectors, capacitors, or modules. This helps in filtering and comparing similar parts. Review the categories to ensure the component fits your application and to find alternative parts in the same class.

Indicates the number of memory slots or modules supported by the system. Compare this value with your motherboard or module specifications to ensure sufficient capacity for your application. Verify against the datasheet for exact slot configuration and maximum memory support.

Indicates the number of PCI Express x4 slots available on the board or system. This matters for expansion cards requiring four lanes of bandwidth. Verify against the product datasheet to ensure compatibility with your intended add-in cards.

Indicates the specific product subcategories or classifications within the broader component family. Helps narrow down search results and identify the exact type of component needed for your design. Review the subcategory to ensure compatibility with your application.

Specifies the PS/2 interface type used for connecting keyboards, mice, or other input devices. Verify compatibility with your system's connector and protocol. Important for industrial PCs, embedded systems, and legacy equipment integration.

Indicates the CompactPCI bus interface standard used by the module. Verify compatibility with your backplane and system architecture before integration. This attribute is critical for industrial computing and telecom applications.

Indicates the presence of an RS485 serial interface for industrial communication. Verify the transceiver type and data rate in the datasheet to ensure compatibility with your network topology and cable length.

Indicates the PCI Express interface width of eight lanes for data transfer. This affects bandwidth and compatibility with motherboards. Verify the slot type and generation supported by the device to ensure proper installation and performance.

Indicates the Mini PCI form factor for expansion cards. Verify compatibility with your system's slot type and physical dimensions. This attribute helps engineers select the correct card for embedded or compact applications.

Indicates the number of PCI Express lanes supported by the device. This affects data transfer bandwidth and compatibility with host systems. Verify the lane configuration against the datasheet to ensure it meets your system's requirements.

Indicates support for the I2C serial communication bus, a two-wire interface for connecting low-speed peripherals. Verify address and timing compatibility with your microcontroller. Essential for sensors, EEPROMs, and other ICs.

Total number of electrical contacts in the system memory socket. This determines the memory module compatibility and maximum bandwidth. Verify against the motherboard or module datasheet to ensure correct mating and signal integrity.

Specifies the exact model or identifier of the processor, crucial for verifying compatibility with your system design. Buyers and engineers should confirm this number against the datasheet to ensure correct performance, power, and interface specifications.

Indicates the clock frequency at which the processor operates, affecting computational throughput and response times. Compare speeds when selecting microcontrollers, MPUs, or SoCs for your application, and verify against the datasheet for actual performance under load.

Specifies the set of Intel proprietary technologies integrated into the component, such as QuickAssist, VT-x, or Turbo Boost. Verify supported features against the datasheet to ensure compatibility with your system and software requirements.

Specifies the capacity of the data cache in bytes. This affects processing speed for data-intensive applications. Compare across similar microcontrollers or processors to ensure sufficient cache for your workload. Verify against the datasheet for exact specifications.

Specifies the integrated audio controller type on the motherboard or module. Compare codec or DSP generations for driver support, audio quality, and channel configuration. Verify compatibility with your operating system and intended audio interfaces before design-in.

Indicates the Mini PCI Express form factor for expansion cards. Verify compatibility with your system's slot and mechanical dimensions. This attribute helps identify modules for embedded or compact applications.

Identifies the processor family or generation, such as Intel Core or ARM Cortex. This attribute helps engineers select compatible software, tools, and peripherals. Verify the exact family against the datasheet to ensure performance and feature expectations are met.

Specifies the maximum heat a processor is designed to dissipate under typical heavy workloads. Engineers compare TDP to select appropriate cooling solutions and power supplies. Verify the exact value in the processor datasheet, as it affects system thermal management and reliability.

Indicates the presence of a microphone input connector. Check the datasheet for the audio codec, input impedance, and supported microphone types to ensure proper signal levels and compatibility with your audio source.

Number of PCI expansion slots on the board or system. Check this to ensure enough slots for add-on cards like network or storage controllers. Verify against the product datasheet for exact slot types and compatibility.

Indicates the number of PCIe x16 slots on the board or system. Verify this specification to ensure compatibility with high-bandwidth expansion cards such as GPUs, NVMe adapters, or accelerators. Check the datasheet for supported PCIe generations and lane configurations.

Indicates the USB standard or version supported by the component, such as USB 2.0 or USB 3.2. Determines data transfer rates and power delivery capabilities. Verify compatibility with your host controller and cable.

Specifies the main chipset model or family used on the component. Engineers compare this to ensure compatibility with the system's processor and peripherals. Always verify the exact chipset revision against the datasheet for proper integration.

Indicates whether the component supports the Serial Peripheral Interface bus. Check this attribute to confirm compatibility with your microcontroller's SPI pins. Verify the datasheet for supported modes and maximum clock frequency.

Indicates the firmware type that initializes hardware during boot. For embedded boards and modules, verify compatibility with your operating system and boot requirements. Check the datasheet for supported versions and update procedures.

Identifies the company that designed and produced the component. Buyers often filter by manufacturer to ensure brand reliability, quality standards, and supply chain consistency. Verify the manufacturer against the datasheet and official packaging to avoid counterfeit parts.

Indicates the clock frequency at which the system memory operates, affecting data transfer rates and overall system performance. Verify this value against the memory module's datasheet to ensure compatibility with the motherboard and CPU memory controller.

Specifies the material of the component's outer casing, such as plastic, metal, or ceramic. This affects durability, thermal performance, and environmental resistance. Verify against datasheet for application-specific requirements like flammability or chemical exposure.

Defines the maximum amount of system memory the board or module can support. Verify the memory type, speed, and slot configuration in the datasheet to ensure your memory modules are compatible.

Specifies the highest relative humidity at which the component can operate reliably without degradation. Exceeding this limit may cause condensation, corrosion, or electrical failure. Verify against the datasheet for environmental compliance and proper enclosure design.

Indicates support for Embedded DisplayPort, a digital interface for internal display connections. Verify compatibility with your panel and driver ICs. Check the datasheet for supported eDP versions and lane configurations.

Indicates whether the component or module provides a VGA video output interface. Check this attribute when selecting display controllers, embedded boards, or graphics modules. Verify compatibility with your display and system requirements in the datasheet.

Indicates the nominal voltage at which the component is designed to operate under standard conditions. Compare this value with your system's power rail to ensure compatibility. Always verify against the datasheet's recommended operating range, as actual performance may vary with load and temperature.

Indicates the memory technology supported by the system or processor, such as DDR4, LPDDR5, or SRAM. Critical for ensuring compatibility with memory modules and achieving expected performance. Always verify the supported memory types in the datasheet before design-in.

Specifies the lowest relative humidity at which the component can operate without issues. Very low humidity can cause electrostatic discharge or mechanical stress. Verify this limit in the datasheet to ensure reliable operation in dry environments and proper ESD protection measures.

Maximum amount of system memory the component can address, expressed in bytes. Compare with your application's memory requirements and verify against the datasheet to ensure sufficient capacity for your workload.

Indicates the number of independent processing units within the processor. More cores enable parallel task execution, improving multitasking and performance for embedded systems. Verify core count against the datasheet to match your application's computational demands.

Indicates support for the System Management Bus, a two-wire interface for communication with low-bandwidth devices on a motherboard. Check the datasheet for SMBus protocol compliance and voltage levels to ensure compatibility with your system's management and monitoring functions.

Identifies the specific Ethernet controller model or family used on the module or board. This determines supported speeds, interfaces, and driver compatibility. Engineers should verify the exact controller type against the datasheet to ensure software support and network performance meet application requirements.

Indicates support for RS232 serial communication, commonly used for industrial equipment, terminals, and legacy devices. Confirm the number of ports, baud rate, and signal levels in the datasheet to ensure proper integration with your serial peripherals.

Specifies the electrical interface used to connect a display, such as LVDS, MIPI DSI, or HDMI. Ensure it matches your display panel and controller. Critical for selecting compatible display modules or driver ICs.

Specifies the display technology used in the component, such as LCD, OLED, or TFT. This attribute helps engineers select the right module for their application. Verify the exact type and resolution in the datasheet to ensure compatibility with your system.

The unique part number assigned by the original component manufacturer. Use this to cross-reference datasheets, verify specifications, and ensure the exact component matches your design requirements. Always confirm the number against the manufacturer's official documentation.

Identifies the chipset that drives the display interface, affecting resolution support, signal conversion, and compatibility with panels. Verify the chipset against the datasheet to ensure it meets your system's display requirements and driver availability.

The weight of the component in grams, useful for logistics, mechanical design, and weight-sensitive applications. Compare weights when evaluating similar parts for assembly or shipping cost calculations. Verify the value in the datasheet if precise weight is critical for your design.

Defines the maximum display resolution supported by the graphics card or integrated GPU. Important for selecting components for video processing, industrial displays, or embedded systems. Check the datasheet to ensure compatibility with your display interface and required pixel throughput.

Specifies the highest current the device draws from its supply under normal operating conditions. Compare this value with your power budget and verify it against the datasheet for worst-case scenarios, especially when designing for battery life or thermal management.

Specifies the highest ambient temperature at which the component can operate reliably. Exceeding this limit may cause performance degradation or permanent damage. Always verify this value against the datasheet for your specific application and thermal conditions.

Specifies the lowest ambient temperature at which the component reliably functions. Critical for automotive, industrial, and outdoor applications. Verify against datasheet to ensure performance and longevity in your operating environment.

Number of general-purpose input/output pins available on the component. Compare this count to your design's requirements for interfacing with peripherals, sensors, or LEDs. Verify the exact pin functions and electrical characteristics in the datasheet.