2273115-4 Circular Cable Assemblies by TE Connectivity

Indicates the floor life of a component before it must be baked prior to soldering. Higher levels require stricter handling and shorter exposure times. Verify the MSL rating in the datasheet to ensure proper storage and assembly conditions.

Indicates whether the component complies with the EU RoHS directive restricting hazardous substances. Buyers should verify this status for regulatory compliance and market access. Check the datasheet or certificate for exact compliance details.

Indicates whether the product contains substances of very high concern as per the REACH regulation. Buyers should verify this for compliance with EU environmental standards, especially when exporting to Europe. Check the manufacturer's declaration or datasheet for accurate SVHC status.

Harmonized Tariff Schedule of the United States code for customs classification. Essential for import/export documentation and duty calculation. Verify the correct code with a trade specialist to avoid customs delays.

Lifecycle status of the part, such as active or obsolete. Indicates availability and long-term support from the manufacturer. Check this before design-in to avoid last-time buys or supply disruptions. Verify with the datasheet or distributor for current status.

Identifies the company that designed and produced the component. Buyers often filter by manufacturer to ensure brand reliability, quality standards, and supply chain consistency. Verify the manufacturer against the datasheet and official packaging to avoid counterfeit parts.

Indicates compliance with the European End-of-Life Vehicle directive, restricting hazardous substances in automotive components. Verify this attribute when sourcing parts for vehicles to ensure environmental and regulatory compliance. Check the datasheet or certificate for specific ELV status.

Export Control Classification Number assigned by the U.S. government. Determines whether the component requires an export license. Essential for international trade compliance. Verify the ECCN with the manufacturer or supplier before shipping to avoid legal issues.

Indicates the typical duration from order confirmation to shipment from the manufacturer's facility. This helps you plan production schedules and inventory. Verify current lead times with your distributor or supplier, as they may vary based on order quantity, product availability, and market conditions.

Current stage in the product's lifecycle, such as Active, Obsolete, or End of Life. This indicates availability and long-term supply risk. Check this before designing in a part to ensure it will be available for your product's production lifetime.

Indicates whether the component is manufactured without lead, complying with RoHS and similar regulations. Check this attribute to ensure environmental compliance for your market. Verify against the datasheet for exact material declarations.

Shows whether the component complies with the EU REACH regulation. Essential for legal market access in Europe. Check the manufacturer's latest statement to confirm that no substances of very high concern are present above the threshold.

Specifies the maximum continuous voltage the component can safely withstand under normal operating conditions. Engineers compare this rating to the circuit's expected voltage to ensure reliable operation. Always verify against the datasheet for derating factors and environmental conditions.

Indicates the form of delivery for the component, such as tape and reel, tube, or tray. This affects handling, storage, and assembly processes. Verify the packaging type matches your production requirements and equipment compatibility.

Specifies the lowest ambient temperature at which the component is guaranteed to function within its electrical and mechanical specifications. Verify this limit against the datasheet for your application's thermal environment, especially for automotive or industrial designs.

Specifies the wire gauge size that the connector or terminal is designed to accept. Verify compatibility with your cable's AWG or metric cross-section to ensure proper crimping, current rating, and mechanical retention. Always check the manufacturer's datasheet for the exact range.

Published indicates the date when the product data was released or updated in the catalog. It helps buyers assess the freshness of the information and whether the component is current or possibly obsolete. Check the datasheet for the latest revisions.

This attribute describes the type of shielding applied to a component or cable, such as foil, braid, or a combination, to protect against electromagnetic interference. Buyers and engineers use it to ensure compatibility with EMC requirements and to maintain signal integrity in sensitive applications. Confirm the shielding effectiveness with the datasheet.

Specifies the visual color of the component body or housing. Useful for identifying parts in inventory or matching design aesthetics. Verify against the datasheet or physical sample, as color may vary between manufacturers and batches.

Total number of pins or contacts on the component. This determines the footprint and mating connector requirements. Always match the pin count to your PCB layout and connector specification to ensure proper electrical and mechanical connection.

Specifies the maximum continuous current the component can safely carry under specified conditions. Compare this value with your circuit's expected load to ensure reliable operation. Always verify against the datasheet for temperature derating and mounting considerations.

Defines the maximum continuous current that a single contact can safely carry. Exceeding this rating may cause overheating, contact degradation, or failure. Check the datasheet for derating curves and ambient temperature effects.

Specifies the voltage range within which the component operates correctly. Check the datasheet to ensure your power supply meets the minimum and maximum limits, as exceeding them can damage the device or cause malfunction.

Total number of contact positions in the connector. This determines the maximum number of electrical connections possible. Compare with your circuit requirements and verify against the datasheet to ensure the connector matches your pin count and layout.

Specifies the maximum rated voltage, current, and power for safe operation. Compare these limits with your circuit requirements to ensure reliability. Always verify against the datasheet for derating curves and environmental conditions.

Gender indicates whether a connector is male (with pins) or female (with sockets). This is critical for mating compatibility in cable assemblies and board-to-board connections. Verify gender against the mating connector part number to ensure proper fit and reliable electrical contact.

Specifies the material of the component's outer casing, such as plastic, metal, or ceramic. This affects durability, thermal performance, and environmental resistance. Verify against datasheet for application-specific requirements like flammability or chemical exposure.

Ingress Protection rating indicates the level of sealing against solids and liquids. Compare IP codes when selecting enclosures for harsh environments. Verify the exact rating in the datasheet to ensure suitability for your application.

Specifies the highest ambient temperature at which the component reliably functions. Compare this limit with your application's thermal environment to ensure safe operation. Always verify against the datasheet's derating curves and test conditions, as exceeding this value may cause performance degradation or permanent damage.

Intended application or usage of the component. This helps identify the target market and typical use cases, such as automotive, industrial, or consumer electronics. Verify that the component's specifications align with your application's environmental and performance requirements.

Describes the physical arrangement of the assembly, such as straight, right-angle, or panel-mount. This affects installation space and routing. Check the configuration against your mechanical constraints to ensure proper fit and cable management.

Specifies how many contact positions are actually populated in the first connector. Compare this with the total number of positions to understand if the connector is fully or partially loaded. Verify against the datasheet or part drawing before ordering to ensure it matches your application requirements.

Specifies how the first connector is attached to the board or panel, such as through-hole, surface mount, or panel mount. This affects mechanical stability and assembly process. Verify compatibility with your PCB layout and enclosure design before ordering.

Indicates the product series or family, grouping components with similar design and specifications. Helps identify compatible parts and compare within a product line. Verify the series against the datasheet to ensure correct application.

Indicates whether the first connector is male (with pins) or female (with sockets). This determines mating compatibility with the corresponding connector. Always match gender with the mating part to ensure proper connection and avoid mechanical or electrical issues.

Lists the product categories or classifications assigned to this component, such as connectors, capacitors, or modules. This helps in filtering and comparing similar parts. Review the categories to ensure the component fits your application and to find alternative parts in the same class.

Indicates the specific product subcategories or classifications within the broader component family. Helps narrow down search results and identify the exact type of component needed for your design. Review the subcategory to ensure compatibility with your application.

Select the cable construction that matches your application, such as coaxial, ribbon, or twisted pair. This determines signal integrity, flexibility, and shielding. Verify the exact type against the datasheet to ensure compatibility with connectors and environmental requirements.

Specifies the connector style on the first end of the cable or assembly, such as SMA, USB, or RJ45. This determines compatibility with mating ports. Always confirm the exact series and gender to avoid mismatches in your system.

Specifies the physical length of the component body, typically in millimeters. This dimension is critical for PCB layout and mechanical fit. Verify against the datasheet to ensure proper clearance and alignment in your design.

Specifies the insulation or jacket material of the cable, affecting flexibility, temperature rating, and chemical resistance. Compare materials like PVC, silicone, or Teflon for environmental suitability. Verify against datasheet for compliance with application requirements.

Specifies the dielectric material used to isolate conductive parts in components such as transformers, connectors, or cables. This affects thermal resistance, voltage withstand capability, and flammability rating. Verify the material against datasheet specifications for safety and performance in your application.

Describes the angular position of the first connector relative to the mounting surface, such as straight, right-angle, or vertical. This affects cable routing and space constraints in your assembly. Confirm orientation matches your mechanical design and mating direction.

Specifies how many separate conductive paths are inside the component, such as wires in a cable or traces in a connector. This affects current capacity and signal routing. Verify against the datasheet for proper circuit design and compatibility.

Number of positions on the first connector indicates how many electrical contacts or pins are available on the primary connector of a cable assembly or device. This is critical for matching pin counts with mating connectors. Always verify against the datasheet to ensure compatibility.

Specifies whether the second connector on the component is male or female. This is critical for mating compatibility in cable assemblies and panel mounts. Verify against the datasheet to ensure proper connection with the corresponding counterpart.

Specifies how many of the second connector's available positions are actually populated with contacts. This matters when comparing cable assemblies or board-to-board connectors with optional pin loading. Always verify against the datasheet to ensure the exact number of loaded positions matches your application requirements.

Specifies the pin count on the secondary connector of a multi-connector component. Compare this with the primary connector's pin count to ensure proper mating and signal routing. Always verify against the datasheet for exact pin assignments and compatibility.

Specifies the outer diameter of the wire or cable, affecting fit and routing in assemblies. Compare with connector or terminal specifications to ensure proper mating and strain relief. Verify against the datasheet for tolerance and insulation thickness.

Specifies how the second connector is attached to the PCB or panel, such as through-hole, surface mount, or solder cup. This affects mechanical stability and assembly process. Verify compatibility with your board layout and soldering method.

Identifies the standard or series of connector B, such as USB, HDMI, or circular. This ensures mechanical and electrical compatibility with mating connectors. Check the datasheet for exact specifications.

Defines the angular position of the second connector relative to the mating direction or board plane, such as vertical, right-angle, or angled. This determines cable routing and space requirements. Confirm it matches your mechanical enclosure and mating access.

Specifies the insulation color of the wire or cable, which aids in identifying circuits during assembly and troubleshooting. Verify the color against the datasheet or physical sample to ensure it matches your application's wiring standards and visual requirements.

Specifies the connector series or family, such as USB, RJ45, or D-Sub. This determines mechanical compatibility, pin layout, and mating standards. Verify against the datasheet to ensure the connector matches your board design and mating counterpart.

Specifies the connector style on the second end of the cable or assembly, such as BNC, D-sub, or Molex. This determines compatibility with the mating port. Verify the exact series and gender to ensure a secure and correct connection.

The unique part number assigned by the original component manufacturer. Use this to cross-reference datasheets, verify specifications, and ensure the exact component matches your design requirements. Always confirm the number against the manufacturer's official documentation.

Specifies the shell size and insert arrangement of the first connector in a multi-connector assembly. This determines mechanical compatibility and pin layout. Verify against the mating connector and datasheet to ensure proper fit and signal integrity.

Specifies the nominal thread dimensions for connectors, fasteners, or mounting hardware. Critical for ensuring mechanical compatibility with mating parts or panel cutouts. Verify against datasheet or mechanical drawing before assembly to avoid fit issues.

Identifies the specific connector standard or series used on side A of the component. This determines mating compatibility, mechanical fit, and signal integrity. Verify against the datasheet to ensure the connector matches your board layout and cable assembly requirements.

Specifies the shell size and insert arrangement of the second connector in a multi-connector assembly. Engineers compare this to ensure mating compatibility and proper pin layout. Verify against the datasheet when designing cable assemblies or backplane connections.

Overall length of the cable assembly from end to end, including connectors if present. This is critical for routing and installation in your system. Ensure the length matches your application requirements to avoid excess slack or tension that could damage the cable or connections.

Number of processor cores in a CPU, MCU, or SoC. Determines parallel processing capability and multitasking performance. Choose based on application workload; more cores generally improve performance but increase power consumption. Verify in datasheet.