What is a cross-reference page for LMV358IDG4?
This page groups mapped replacement options for LMV358IDG4 so buyers and engineers can compare alternatives before requesting a quote or approving a substitute.
Alternative part analysis
LMV358IDG4 replacements, alternatives, and cross reference
Compare mapped replacement and alternative options for LMV358IDG4, then verify package, specifications, and application fit before approval.
Compare LMV358IDG4 against mapped replacement options
Review package, lifecycle, stock, and MOQ in one view
Move from engineering screening to RFQ without leaving the page
No mapped replacement parts yet
This product currently does not show a published cross-reference list. Use RFQ support if your team needs an alternative part review.
Specification view
Parameter Comparison Chart
A side-by-side view of the source part and its mapped alternatives so buyers and engineers can screen package, availability, lifecycle, and key descriptors before RFQ.
swipe Swipe or scroll horizontally to compare more part numbers
The left column stays visible so buyers can keep the spec label in view while scanning multiple alternatives.
| Parameter Comparison Chart | Current part LMV358IDG4 Texas Instruments |
|---|---|
| Part Number | LMV358IDG4 |
| Manufacturer | Texas Instruments |
| Category | Integrated Circuits (ICs) |
| Subcategory | Linear - Amplifiers - Instrumentation, Operational Amplifiers, Buffer Amplifiers |
| Package | 8SOIC |
| Series | - |
| Key Attributes | - |
| Description | IC OPAMP GP 1MHZ RRO 8SOIC |
| Lifecycle | - |
| Stock | 27,633 |
| Available | 15,704 |
| Min Order | 1 |
| Datasheet | Request |
| RoHS Status | RoHS Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| JESD-609 Code | e4 |
| ECCN Code | EAR99 |
| Lead Free | Lead Free |
| Max Operating Temperature | 125°C |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Min Operating Temperature | -40°C |
| Package / Case | SOIC |
| Gain Bandwidth Product | 1MHz |
| Categories | Integrated Circuits (ICs) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Form | GULL WING |
| Manufacturer | Texas |
| Width | 3.91mm |
| Height | 1.75mm |
| Subcategory | Operational Amplifier |
| Sub-Categories | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps |
| Slew Rate | 1 V/μs |
| Input Offset Voltage (Vos) | 7mV |
| Nominal Supply Current | 440μA |
| Min Supply Voltage | 2.7V |
| Radiation Hardening | No |
| Mount | Surface Mount |
| Pbfree Code | yes |
| Number of Functions | 2 |
| Technology | BIPOLAR |
| Number of Pins | 8 |
| Number of Terminations | 8 |
| Pin Count | 8 |
| Length | 4.9mm |
| Max Supply Voltage | 5.5V |
| Bandwidth | 1MHz |
| Supply Voltage | 2.7V |
| Data Encoding\/Decoding Method | NO |
| Common Mode Rejection Ratio | 50 dB |
| Output Current per Channel | 160mA |
| Temperature Grade | AUTOMOTIVE |
| Operating Supply Current | 210μA |
| Packaging | Rail/Tube |
| Max Supply Voltage (AC) | 1000 kHz |
| Manufacturer's Part No. | LMV358IDG4 |
| Duplex | 160mA |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Power Supplies | 3/5V |
| Number of Elements | 2 |
| Mode of Operation | NO |
| Number of Lines | VOLTAGE-FEEDBACK |
| Total Dose | 1.58mm |
| Current - Input | YES |
| Voltage - Clamping | NO |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Count Direction | NO |
| Load\/Preset Input | YES |
| Current - Input Bias | 250nA |
| Nominal Gain Bandwidth Product | 100dB |
| Diode Element Material | 0.05μA |
| Actions |
Cross-reference FAQ
Replacement Part Questions
Short answers for teams reviewing LMV358IDG4 replacement and equivalent-part options.
Does a mapped alternative mean a guaranteed drop-in replacement for LMV358IDG4?
Not automatically. Cross-reference mapping helps shortlist candidates, but package, electrical behavior, qualification scope, and approval rules still need to be checked before release.
Which parameters should teams compare first for LMV358IDG4 alternatives?
Start with package, series, key attributes, lifecycle status, stock position, datasheet access, and the mapped pin-to-pin or cross-reference note. Then confirm application-specific requirements in the datasheet and RFQ stage.
Can I request a quote for an alternative to LMV358IDG4?
Yes. Use the product links or RFQ actions on this page to request pricing, availability, documentation, and sourcing support for any listed alternative part.
Is LMV358IDG4 obsolete, and what replacement should buyers review first?
Check the lifecycle row on this page first. If buyers need a fast starting point, the strongest mapped replacement currently surfaced here is , followed by the other alternatives shown in the comparison table.
Engineering support
Need help validating the replacement path?
If your team is unsure whether a mapped alternative to LMV358IDG4 from Texas Instruments is really usable, contact us for help on package fit, pin compatibility, key parameter gaps, and qualification-facing review questions.
Contact a hardware engineer
Email our engineering support contact at [email protected], or use the contact page if the question should be routed across sourcing, engineering, and support.
developer_board
Package and pin compatibility
Review whether the alternate path looks credible from package, footprint, and pin-level perspectives.
tune
Parameter and function gaps
Surface the electrical, interface, or application-fit questions that still need confirmation before approval.
task_alt
Qualification and approval prep
Organize the documentation, datasheet evidence, and validation checkpoints your internal team may still require.