What is a cross-reference page for LM614IWMX/NOPB?
This page groups mapped replacement options for LM614IWMX/NOPB so buyers and engineers can compare alternatives before requesting a quote or approving a substitute.
Alternative part analysis
LM614IWMX/NOPB replacements, alternatives, and cross reference
Compare mapped replacement and alternative options for LM614IWMX/NOPB, then verify package, specifications, and application fit before approval.
Compare LM614IWMX/NOPB against mapped replacement options
Review package, lifecycle, stock, and MOQ in one view
Move from engineering screening to RFQ without leaving the page
No mapped replacement parts yet
This product currently does not show a published cross-reference list. Use RFQ support if your team needs an alternative part review.
Specification view
Parameter Comparison Chart
A side-by-side view of the source part and its mapped alternatives so buyers and engineers can screen package, availability, lifecycle, and key descriptors before RFQ.
swipe Swipe or scroll horizontally to compare more part numbers
The left column stays visible so buyers can keep the spec label in view while scanning multiple alternatives.
| Parameter Comparison Chart | Current part LM614IWMX/NOPB Texas Instruments |
|---|---|
| Part Number | LM614IWMX/NOPB |
| Manufacturer | Texas Instruments |
| Category | Integrated Circuits (ICs) |
| Subcategory | Linear - Amplifiers - Instrumentation, Operational Amplifiers, Buffer Amplifiers |
| Package | 16SOIC |
| Series | Super-Block™ |
| Key Attributes | - |
| Description | IC OPAMP GP 800KHZ 16SOIC |
| Lifecycle | - |
| Stock | 79,612 |
| Available | 39,404 |
| Min Order | 1 |
| Datasheet | Request |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Bias Current-Max (IIB) @25C | 0.035μA |
| Voltage Gain | 113.98dB |
| Frequency Compensation | YES |
| Amplifier Type | General Purpose |
| Low-Offset | NO |
| Number of Elements | 4 |
| Voltage - Input Offset | 1.5mV |
| Supply Voltage Limit-Max | 36V |
| Current - Input Bias | 10nA |
| Unity Gain BW-Nom | 520 kHz |
| Power Supplies | 3/36V |
| JESD-609 Code | e3 |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| HTSUS | 8542.33.0001 |
| ECCN Code | EAR99 |
| REACH Status | REACH Unaffected |
| ECCN | EAR99 |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Operating Temperature | -40°C~85°C |
| Categories | Integrated Circuits (ICs) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Output Current | 30mA |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Manufacturer | Texas |
| Length | 10.3mm |
| Packing Method | TAPE AND REEL |
| Subcategory | Operational Amplifier |
| Sub-Categories | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps |
| Input Offset Voltage (Vos) | 5mV |
| Architecture | VOLTAGE-FEEDBACK |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Pbfree Code | no |
| Radiation Hardening | No |
| Number of Terminations | 16 |
| Pin Count | 16 |
| Number of Pins | 16 |
| Mount | Surface Mount |
| Technology | BIPOLAR |
| Output Current per Channel | 25mA |
| Terminal Pitch | 1.27mm |
| Number of Functions | 4 |
| Common Mode Rejection Ratio | 75 dB |
| Slew Rate | 0.7V/μs |
| Nominal Supply Current | 450μA |
| Operating Supply Current | 450μA |
| Gain Bandwidth Product | 800kHz |
| Series | Super-Block™ |
| Manufacturer's Part No. | LM614IWMX/NOPB |
| Base Part Number | LM614 |
| Height Seated (Max) | 2.65mm |
| Actions |
Cross-reference FAQ
Replacement Part Questions
Short answers for teams reviewing LM614IWMX/NOPB replacement and equivalent-part options.
Does a mapped alternative mean a guaranteed drop-in replacement for LM614IWMX/NOPB?
Not automatically. Cross-reference mapping helps shortlist candidates, but package, electrical behavior, qualification scope, and approval rules still need to be checked before release.
Which parameters should teams compare first for LM614IWMX/NOPB alternatives?
Start with package, series, key attributes, lifecycle status, stock position, datasheet access, and the mapped pin-to-pin or cross-reference note. Then confirm application-specific requirements in the datasheet and RFQ stage.
Can I request a quote for an alternative to LM614IWMX/NOPB?
Yes. Use the product links or RFQ actions on this page to request pricing, availability, documentation, and sourcing support for any listed alternative part.
Is LM614IWMX/NOPB obsolete, and what replacement should buyers review first?
Check the lifecycle row on this page first. If buyers need a fast starting point, the strongest mapped replacement currently surfaced here is , followed by the other alternatives shown in the comparison table.
Engineering support
Need help validating the replacement path?
If your team is unsure whether a mapped alternative to LM614IWMX/NOPB from Texas Instruments is really usable, contact us for help on package fit, pin compatibility, key parameter gaps, and qualification-facing review questions.
Contact a hardware engineer
Email our engineering support contact at [email protected], or use the contact page if the question should be routed across sourcing, engineering, and support.
developer_board
Package and pin compatibility
Review whether the alternate path looks credible from package, footprint, and pin-level perspectives.
tune
Parameter and function gaps
Surface the electrical, interface, or application-fit questions that still need confirmation before approval.
task_alt
Qualification and approval prep
Organize the documentation, datasheet evidence, and validation checkpoints your internal team may still require.