What is a cross-reference page for ADC102S021CIMM?
This page groups mapped replacement options for ADC102S021CIMM so buyers and engineers can compare alternatives before requesting a quote or approving a substitute.
Alternative part analysis
ADC102S021CIMM replacements, alternatives, and cross reference
Compare mapped replacement and alternative options for ADC102S021CIMM, then verify package, specifications, and application fit before approval.
Compare ADC102S021CIMM against mapped replacement options
Review package, lifecycle, stock, and MOQ in one view
Move from engineering screening to RFQ without leaving the page
No mapped replacement parts yet
This product currently does not show a published cross-reference list. Use RFQ support if your team needs an alternative part review.
Specification view
Parameter Comparison Chart
A side-by-side view of the source part and its mapped alternatives so buyers and engineers can screen package, availability, lifecycle, and key descriptors before RFQ.
swipe Swipe or scroll horizontally to compare more part numbers
The left column stays visible so buyers can keep the spec label in view while scanning multiple alternatives.
| Parameter Comparison Chart | Current part ADC102S021CIMM Texas Instruments |
|---|---|
| Part Number | ADC102S021CIMM |
| Manufacturer | Texas Instruments |
| Category | Integrated Circuits (ICs) |
| Subcategory | Data Acquisition - Analog to Digital Converters (ADC) |
| Package | TSSOP |
| Series | - |
| Key Attributes | - |
| Description | IC ADC 10BIT 2CN 200KSPS 8VSSOP |
| Lifecycle | - |
| Stock | 192,986 |
| Available | 54,864 |
| Min Order | 1 |
| Datasheet | Request |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| RoHS Status | RoHS non-compliant |
| JESD-609 Code | e0 |
| HTSUS | 8542.39.0001 |
| ECCN Code | EAR99 |
| REACH Status | REACH Unaffected |
| ECCN | EAR99 |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Operating Temperature | -40°C~85°C |
| Data Interface | SPI, DSP |
| Categories | Integrated Circuits (ICs) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Form | GULL WING |
| Reference Type | Supply |
| Interface | SPI, Serial |
| Technology | CMOS |
| Sub-Categories | Data Acquisition - Analog to Digital Converters (ADC) |
| Manufacturer | Texas |
| Subcategory | Analog to Digital Converters |
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Polarity | Unipolar |
| Resolution | 1.25 B |
| Voltage - Supply, Analog | 2.7V~5.25V |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Sampling Rate | 200 ksps |
| Base Part Number | ADC102S021 |
| Integral Nonlinearity (INL) | -0.4 LSB |
| Max Power Dissipation | 9.5mW |
| Voltage - Supply, Digital | 2.7V~5.25V |
| Number of Functions | 1 |
| Operating Supply Voltage | 5V |
| Min Supply Voltage | 2.7V |
| Pbfree Code | no |
| Max Supply Voltage | 5.25V |
| Radiation Hardening | No |
| Mount | Surface Mount |
| Number of Pins | 8 |
| Number of Terminations | 8 |
| Pin Count | 8 |
| Length | 3mm |
| Width | 3mm |
| Number of Bits | 10 |
| Conversion Rate | 200 ksps |
| Manufacturer's Part No. | ADC102S021CIMM |
| Input Type | Single Ended |
| Sample and Hold / Track and Hold | TRACK |
| Configuration | MUX-S/H-ADC |
| Sampling Rate (Per Second) | 200k |
| Signal to Noise Ratio (SNR) | 61.8 dB |
| Power Consumption | 1.94mW |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY |
| Number of A/D Converters | 1 |
| Number of Channels | 2 |
| Number of Elements | 1 |
| Supply Type | Single |
| Actions |
Cross-reference FAQ
Replacement Part Questions
Short answers for teams reviewing ADC102S021CIMM replacement and equivalent-part options.
Does a mapped alternative mean a guaranteed drop-in replacement for ADC102S021CIMM?
Not automatically. Cross-reference mapping helps shortlist candidates, but package, electrical behavior, qualification scope, and approval rules still need to be checked before release.
Which parameters should teams compare first for ADC102S021CIMM alternatives?
Start with package, series, key attributes, lifecycle status, stock position, datasheet access, and the mapped pin-to-pin or cross-reference note. Then confirm application-specific requirements in the datasheet and RFQ stage.
Can I request a quote for an alternative to ADC102S021CIMM?
Yes. Use the product links or RFQ actions on this page to request pricing, availability, documentation, and sourcing support for any listed alternative part.
Is ADC102S021CIMM obsolete, and what replacement should buyers review first?
Check the lifecycle row on this page first. If buyers need a fast starting point, the strongest mapped replacement currently surfaced here is , followed by the other alternatives shown in the comparison table.
Engineering support
Need help validating the replacement path?
If your team is unsure whether a mapped alternative to ADC102S021CIMM from Texas Instruments is really usable, contact us for help on package fit, pin compatibility, key parameter gaps, and qualification-facing review questions.
Contact a hardware engineer
Email our engineering support contact at [email protected], or use the contact page if the question should be routed across sourcing, engineering, and support.
developer_board
Package and pin compatibility
Review whether the alternate path looks credible from package, footprint, and pin-level perspectives.
tune
Parameter and function gaps
Surface the electrical, interface, or application-fit questions that still need confirmation before approval.
task_alt
Qualification and approval prep
Organize the documentation, datasheet evidence, and validation checkpoints your internal team may still require.