What is a cross-reference page for MAX1203AEAP+T?
This page groups mapped replacement options for MAX1203AEAP+T so buyers and engineers can compare alternatives before requesting a quote or approving a substitute.
Alternative part analysis
MAX1203AEAP+T replacements, alternatives, and cross reference
Compare mapped replacement and alternative options for MAX1203AEAP+T, then verify package, specifications, and application fit before approval.
Compare MAX1203AEAP+T against mapped replacement options
Review package, lifecycle, stock, and MOQ in one view
Move from engineering screening to RFQ without leaving the page
No mapped replacement parts yet
This product currently does not show a published cross-reference list. Use RFQ support if your team needs an alternative part review.
Specification view
Parameter Comparison Chart
A side-by-side view of the source part and its mapped alternatives so buyers and engineers can screen package, availability, lifecycle, and key descriptors before RFQ.
swipe Swipe or scroll horizontally to compare more part numbers
The left column stays visible so buyers can keep the spec label in view while scanning multiple alternatives.
| Parameter Comparison Chart | Current part MAX1203AEAP+T Maxim Integrated |
|---|---|
| Part Number | MAX1203AEAP+T |
| Manufacturer | Maxim Integrated |
| Category | Integrated Circuits (ICs) |
| Subcategory | Data Acquisition - Analog to Digital Converters (ADC) |
| Package | SSOP |
| Series | - |
| Key Attributes | - |
| Description | IC ADC 12BIT 8CH 20-SSOP |
| Lifecycle | - |
| Stock | 93,991 |
| Available | 65,109 |
| Min Order | 1 |
| Datasheet | Available |
| Part Status | Active |
| REACH Status | REACH Unaffected |
| ECCN | EAR99 |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Factory Lead Time | 12 Weeks |
| Packaging | Tape & Reel (TR) |
| Operating Temperature | -40°C~85°C |
| Published | 2012 |
| Categories | Integrated Circuits (ICs) |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Form | GULL WING |
| Polarity | Bipolar, Unipolar |
| Supply Voltage | 5V |
| Interface | SPI, Serial |
| Technology | CMOS |
| Qualification Status | Not Qualified |
| Sub-Categories | Data Acquisition - Analog to Digital Converters (ADC) |
| Subcategory | Analog to Digital Converters |
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Terminal Pitch | 0.65mm |
| Resolution | 1.5 B |
| Data Interface | SPI |
| Reference Type | External |
| Max Power Dissipation | 7.5mW |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Manufacturer | Maxim Integrated |
| Base Part Number | MAX1203 |
| Sampling Rate | 133 ksps |
| Voltage - Supply, Analog | ±5V 5V |
| Width | 5.29mm |
| Voltage - Supply, Digital | 2.7V~5.25V |
| Number of Functions | 1 |
| Number of Bits | 12 |
| Reflow Temperature-Max (s) | 30 |
| Number of Terminations | 20 |
| Number of Pins | 20 |
| Pin Count | 20 |
| Mount | Surface Mount |
| Pbfree Code | yes |
| Length | 7.2mm |
| Operating Supply Voltage | 5.25V |
| Conversion Rate | 133 ksps |
| Manufacturer's Part No. | MAX1203AEAP+T |
| Output Bit Code | BINARY, 2'S COMPLEMENT BINARY |
| Terminal Finish | Matte Tin (Sn) |
| Sample and Hold / Track and Hold | TRACK |
| Configuration | MUX-S/H-ADC |
| Number of Inputs | 4, 8 |
| Input Type | Differential, Single Ended |
| Signal to Noise Ratio (SNR) | 71 dB |
| Analog Input Voltage-Min | -2.048V |
| Sampling Rate (Per Second) | 133k |
| Number of A/D Converters | 1 |
| Number of Analog In Channels | 8 |
| Supply Type | Dual |
| Negative Supply Voltage-Nom | -5V |
| Analog Input Voltage-Max | 2.048V |
| Power Supplies | 3/55GND/-5V |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| RoHS Status | ROHS3 Compliant |
| HTSUS | 8542.39.0001 |
| ECCN Code | EAR99 |
| Actions |
Cross-reference FAQ
Replacement Part Questions
Short answers for teams reviewing MAX1203AEAP+T replacement and equivalent-part options.
Does a mapped alternative mean a guaranteed drop-in replacement for MAX1203AEAP+T?
Not automatically. Cross-reference mapping helps shortlist candidates, but package, electrical behavior, qualification scope, and approval rules still need to be checked before release.
Which parameters should teams compare first for MAX1203AEAP+T alternatives?
Start with package, series, key attributes, lifecycle status, stock position, datasheet access, and the mapped pin-to-pin or cross-reference note. Then confirm application-specific requirements in the datasheet and RFQ stage.
Can I request a quote for an alternative to MAX1203AEAP+T?
Yes. Use the product links or RFQ actions on this page to request pricing, availability, documentation, and sourcing support for any listed alternative part.
Is MAX1203AEAP+T obsolete, and what replacement should buyers review first?
Check the lifecycle row on this page first. If buyers need a fast starting point, the strongest mapped replacement currently surfaced here is , followed by the other alternatives shown in the comparison table.
Engineering support
Need help validating the replacement path?
If your team is unsure whether a mapped alternative to MAX1203AEAP+T from Maxim Integrated is really usable, contact us for help on package fit, pin compatibility, key parameter gaps, and qualification-facing review questions.
Contact a hardware engineer
Email our engineering support contact at [email protected], or use the contact page if the question should be routed across sourcing, engineering, and support.
developer_board
Package and pin compatibility
Review whether the alternate path looks credible from package, footprint, and pin-level perspectives.
tune
Parameter and function gaps
Surface the electrical, interface, or application-fit questions that still need confirmation before approval.
task_alt
Qualification and approval prep
Organize the documentation, datasheet evidence, and validation checkpoints your internal team may still require.