What is a cross-reference page for TL064INSR?
This page groups mapped replacement options for TL064INSR so buyers and engineers can compare alternatives before requesting a quote or approving a substitute.
Alternative part analysis
TL064INSR replacements, alternatives, and cross reference
Compare mapped replacement and alternative options for TL064INSR, then verify package, specifications, and application fit before approval.
Compare TL064INSR against mapped replacement options
Review package, lifecycle, stock, and MOQ in one view
Move from engineering screening to RFQ without leaving the page
No mapped replacement parts yet
This product currently does not show a published cross-reference list. Use RFQ support if your team needs an alternative part review.
Specification view
Parameter Comparison Chart
A side-by-side view of the source part and its mapped alternatives so buyers and engineers can screen package, availability, lifecycle, and key descriptors before RFQ.
swipe Swipe or scroll horizontally to compare more part numbers
The left column stays visible so buyers can keep the spec label in view while scanning multiple alternatives.
| Parameter Comparison Chart | Current part TL064INSR Texas Instruments |
|---|---|
| Part Number | TL064INSR |
| Manufacturer | Texas Instruments |
| Category | Integrated Circuits (ICs) |
| Subcategory | Linear - Amplifiers - Instrumentation, Operational Amplifiers, Buffer Amplifiers |
| Package | SOIC |
| Series | - |
| Key Attributes | - |
| Description | IC OPAMP JFET 1MHZ 14SO |
| Lifecycle | - |
| Stock | 84,126 |
| Available | 27,759 |
| Min Order | 1 |
| Datasheet | Request |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| RoHS Status | RoHS non-compliant |
| JESD-609 Code | e4 |
| HTSUS | 8542.33.0001 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max I/O Voltage | 6mV |
| Unity Gain BW-Nom | 1000 kHz |
| Amplifier Type | J-FET |
| Voltage - Supply, Single/Dual (±) | 7V~36V ±3.5V~18V |
| Input Offset Current-Max (IIO) | 0.0001μA |
| Current - Input Bias | 30pA |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Average Bias Current-Max (IIB) | 0.02μA |
| Voltage Gain | 75.56dB |
| Power Supplies | +-15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Micropower | YES |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Programmable Power | NO |
| Low-Offset | NO |
| Nominal Gain Bandwidth Product | 1MHz |
| Part Status | Active |
| REACH Status | REACH Unaffected |
| ECCN | EAR99 |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Factory Lead Time | 6 Weeks |
| Packaging | Tape & Reel (TR) |
| Operating Temperature | -40°C~85°C |
| Categories | Integrated Circuits (ICs) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Form | GULL WING |
| Manufacturer | Texas |
| Operating Supply Voltage | 18V |
| Length | 10.3mm |
| Thickness | 1.95mm |
| Subcategory | Operational Amplifier |
| Sub-Categories | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps |
| Packing Method | TR |
| Architecture | VOLTAGE-FEEDBACK |
| Base Part Number | TL064 |
| Slew Rate | 3.5V/μs |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Radiation Hardening | No |
| Nominal Supply Current | 1mA |
| Pin Count | 14 |
| Number of Pins | 14 |
| Number of Terminations | 14 |
| Pbfree Code | yes |
| Supply Voltage | 15V |
| Technology | BIPOLAR |
| Terminal Pitch | 1.27mm |
| Number of Functions | 4 |
| Operating Supply Current | 200μA |
| Bandwidth | 1MHz |
| Common Mode Rejection Ratio | 80 dB |
| Number of Circuits | 4 |
| Height | 2mm |
| Width | 5.3mm |
| Input Offset Voltage (Vos) | 3mV |
| Manufacturer's Part No. | TL064INSR |
| Actions |
Cross-reference FAQ
Replacement Part Questions
Short answers for teams reviewing TL064INSR replacement and equivalent-part options.
Does a mapped alternative mean a guaranteed drop-in replacement for TL064INSR?
Not automatically. Cross-reference mapping helps shortlist candidates, but package, electrical behavior, qualification scope, and approval rules still need to be checked before release.
Which parameters should teams compare first for TL064INSR alternatives?
Start with package, series, key attributes, lifecycle status, stock position, datasheet access, and the mapped pin-to-pin or cross-reference note. Then confirm application-specific requirements in the datasheet and RFQ stage.
Can I request a quote for an alternative to TL064INSR?
Yes. Use the product links or RFQ actions on this page to request pricing, availability, documentation, and sourcing support for any listed alternative part.
Is TL064INSR obsolete, and what replacement should buyers review first?
Check the lifecycle row on this page first. If buyers need a fast starting point, the strongest mapped replacement currently surfaced here is , followed by the other alternatives shown in the comparison table.
Engineering support
Need help validating the replacement path?
If your team is unsure whether a mapped alternative to TL064INSR from Texas Instruments is really usable, contact us for help on package fit, pin compatibility, key parameter gaps, and qualification-facing review questions.
Contact a hardware engineer
Email our engineering support contact at [email protected], or use the contact page if the question should be routed across sourcing, engineering, and support.
developer_board
Package and pin compatibility
Review whether the alternate path looks credible from package, footprint, and pin-level perspectives.
tune
Parameter and function gaps
Surface the electrical, interface, or application-fit questions that still need confirmation before approval.
task_alt
Qualification and approval prep
Organize the documentation, datasheet evidence, and validation checkpoints your internal team may still require.