What is a cross-reference page for TLV272CDG4?
This page groups mapped replacement options for TLV272CDG4 so buyers and engineers can compare alternatives before requesting a quote or approving a substitute.
Alternative part analysis
TLV272CDG4 replacements, alternatives, and cross reference
Compare mapped replacement and alternative options for TLV272CDG4, then verify package, specifications, and application fit before approval.
Compare TLV272CDG4 against mapped replacement options
Review package, lifecycle, stock, and MOQ in one view
Move from engineering screening to RFQ without leaving the page
No mapped replacement parts yet
This product currently does not show a published cross-reference list. Use RFQ support if your team needs an alternative part review.
Specification view
Parameter Comparison Chart
A side-by-side view of the source part and its mapped alternatives so buyers and engineers can screen package, availability, lifecycle, and key descriptors before RFQ.
swipe Swipe or scroll horizontally to compare more part numbers
The left column stays visible so buyers can keep the spec label in view while scanning multiple alternatives.
| Parameter Comparison Chart | Current part TLV272CDG4 Texas Instruments |
|---|---|
| Part Number | TLV272CDG4 |
| Manufacturer | Texas Instruments |
| Category | Integrated Circuits (ICs) |
| Subcategory | Linear - Amplifiers - Instrumentation, Operational Amplifiers, Buffer Amplifiers |
| Package | 8SOIC |
| Series | - |
| Key Attributes | - |
| Description | IC OPAMP GP 3MHZ RRO 8SOIC |
| Lifecycle | - |
| Stock | 90,480 |
| Available | 36,965 |
| Min Order | 1 |
| Datasheet | Request |
| Part Status | Active |
| Lead Free | Lead Free |
| Packaging | Tube |
| Mounting Type | Surface Mount |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Factory Lead Time | 6 Weeks |
| Categories | Integrated Circuits (ICs) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Manufacturer | Texas |
| Width | 3.91mm |
| Height | 1.75mm |
| Nominal Supply Current | 1.6mA |
| Output Type | Rail-to-Rail |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Subcategory | Operational Amplifier |
| Sub-Categories | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps |
| Input Offset Voltage (Vos) | 5mV |
| Operating Temperature | 0°C~70°C |
| Bandwidth | 3MHz |
| Operating Supply Voltage | 5V |
| Surface Mount | YES |
| Radiation Hardening | No |
| Pbfree Code | yes |
| Number of Functions | 2 |
| Number of Pins | 8 |
| Number of Terminations | 8 |
| Pin Count | 8 |
| Length | 4.9mm |
| Max Supply Voltage (AC) | 3000 kHz |
| Common Mode Rejection Ratio | 58 dB |
| Operating Supply Current | 625μA |
| Slew Rate | 2.6V/μs |
| Base Part Number | TLV272 |
| Neg Supply Voltage-Min (Vsup) | 2.4MHz |
| Output Current | 13mA |
| Output Current per Channel | 13mA |
| Power Dissipation | 396mW |
| Manufacturer's Part No. | TLV272CDG4 |
| RoHS Status | ROHS3 Compliant |
| REACH SVHC | No SVHC |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| JESD-609 Code | e4 |
| ECCN Code | EAR99 |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage - Input Offset | 500μV |
| Current - Input Bias | 1pA |
| Number of Channels | 2 |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 5mV |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Mode of Operation | NO |
| Number of Lines | VOLTAGE-FEEDBACK |
| Load\/Preset Input | NO |
| Count Direction | YES |
| Total Dose | 1.58mm |
| Current - Input | YES |
| Voltage - Clamping | NO |
| Output Data Bus Width | 0.00006μA |
| Diode Element Material | 0.00006μA |
| Nominal Gain Bandwidth Product | 110dB |
| Amplifier Type | CMOS |
| Current - Output / Channel | 8mA |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Actions |
Cross-reference FAQ
Replacement Part Questions
Short answers for teams reviewing TLV272CDG4 replacement and equivalent-part options.
Does a mapped alternative mean a guaranteed drop-in replacement for TLV272CDG4?
Not automatically. Cross-reference mapping helps shortlist candidates, but package, electrical behavior, qualification scope, and approval rules still need to be checked before release.
Which parameters should teams compare first for TLV272CDG4 alternatives?
Start with package, series, key attributes, lifecycle status, stock position, datasheet access, and the mapped pin-to-pin or cross-reference note. Then confirm application-specific requirements in the datasheet and RFQ stage.
Can I request a quote for an alternative to TLV272CDG4?
Yes. Use the product links or RFQ actions on this page to request pricing, availability, documentation, and sourcing support for any listed alternative part.
Is TLV272CDG4 obsolete, and what replacement should buyers review first?
Check the lifecycle row on this page first. If buyers need a fast starting point, the strongest mapped replacement currently surfaced here is , followed by the other alternatives shown in the comparison table.
Engineering support
Need help validating the replacement path?
If your team is unsure whether a mapped alternative to TLV272CDG4 from Texas Instruments is really usable, contact us for help on package fit, pin compatibility, key parameter gaps, and qualification-facing review questions.
Contact a hardware engineer
Email our engineering support contact at [email protected], or use the contact page if the question should be routed across sourcing, engineering, and support.
developer_board
Package and pin compatibility
Review whether the alternate path looks credible from package, footprint, and pin-level perspectives.
tune
Parameter and function gaps
Surface the electrical, interface, or application-fit questions that still need confirmation before approval.
task_alt
Qualification and approval prep
Organize the documentation, datasheet evidence, and validation checkpoints your internal team may still require.