What is a cross-reference page for AD8532ARMZ-REEL?
This page groups mapped replacement options for AD8532ARMZ-REEL so buyers and engineers can compare alternatives before requesting a quote or approving a substitute.
Alternative part analysis
AD8532ARMZ-REEL replacements, alternatives, and cross reference
Compare mapped replacement and alternative options for AD8532ARMZ-REEL, then verify package, specifications, and application fit before approval.
Compare AD8532ARMZ-REEL against mapped replacement options
Review package, lifecycle, stock, and MOQ in one view
Move from engineering screening to RFQ without leaving the page
No mapped replacement parts yet
This product currently does not show a published cross-reference list. Use RFQ support if your team needs an alternative part review.
Specification view
Parameter Comparison Chart
A side-by-side view of the source part and its mapped alternatives so buyers and engineers can screen package, availability, lifecycle, and key descriptors before RFQ.
swipe Swipe or scroll horizontally to compare more part numbers
The left column stays visible so buyers can keep the spec label in view while scanning multiple alternatives.
| Parameter Comparison Chart | Current part AD8532ARMZ-REEL Analog Devices Inc./Maxim Integrated |
|---|---|
| Part Number | AD8532ARMZ-REEL |
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Category | Integrated Circuits (ICs) |
| Subcategory | Linear - Amplifiers - Instrumentation, Operational Amplifiers, Buffer Amplifiers |
| Package | TSSOP |
| Series | - |
| Key Attributes | - |
| Description | IC OPAMP GP 3MHZ RRO 8MSOP |
| Lifecycle | - |
| Stock | 55,754 |
| Available | 66,248 |
| Min Order | 1 |
| Datasheet | Available |
| Terminal Finish | Matte Tin (Sn) |
| Power Supplies | 3/5V |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Voltage Gain | 98.06dB |
| Current - Input Bias | 5pA |
| Unity Gain BW-Nom | 2200 kHz |
| Number of Channels | 2 |
| Frequency Compensation | YES |
| Amplifier Type | General Purpose |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Low-Offset | NO |
| Supply Voltage Limit-Max | 7V |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Supply Current-Max | 3.5mA |
| Power Supply Rejection Ratio (PSRR) | 55dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V ±1.35V~3V |
| Part Status | Active |
| REACH Status | REACH Unaffected |
| ECCN | EAR99 |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Factory Lead Time | 8 Weeks |
| Packaging | Tape & Reel (TR) |
| Operating Temperature | -40°C~85°C |
| Operating Supply Current | 2.5mA |
| Categories | Integrated Circuits (ICs) |
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Form | GULL WING |
| Technology | CMOS |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Output Type | Rail-to-Rail |
| Packing Method | TAPE AND REEL |
| Subcategory | Operational Amplifier |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Sub-Categories | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps |
| Architecture | VOLTAGE-FEEDBACK |
| Bandwidth | 3MHz |
| Slew Rate | 5V/μs |
| Input Voltage Noise Density | 45nV/sqrt Hz |
| Surface Mount | YES |
| Pbfree Code | no |
| Radiation Hardening | No |
| Reflow Temperature-Max (s) | 40 |
| Number of Functions | 2 |
| Number of Pins | 8 |
| Number of Terminations | 8 |
| Pin Count | 8 |
| Length | 3mm |
| Input Offset Voltage (Vos) | 25mV |
| Output Current per Channel | 250mA |
| Quiescent Current | 1.25mA |
| Settling Time | 1.4 μs |
| Common Mode Rejection Ratio | 47 dB |
| Base Part Number | AD8532 |
| Manufacturer's Part No. | AD8532ARMZ-REEL |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| RoHS Status | ROHS3 Compliant |
| REACH SVHC | No SVHC |
| HTSUS | 8542.33.0001 |
| ECCN Code | EAR99 |
| Height Seated (Max) | 1.1mm |
| Actions |
Cross-reference FAQ
Replacement Part Questions
Short answers for teams reviewing AD8532ARMZ-REEL replacement and equivalent-part options.
Does a mapped alternative mean a guaranteed drop-in replacement for AD8532ARMZ-REEL?
Not automatically. Cross-reference mapping helps shortlist candidates, but package, electrical behavior, qualification scope, and approval rules still need to be checked before release.
Which parameters should teams compare first for AD8532ARMZ-REEL alternatives?
Start with package, series, key attributes, lifecycle status, stock position, datasheet access, and the mapped pin-to-pin or cross-reference note. Then confirm application-specific requirements in the datasheet and RFQ stage.
Can I request a quote for an alternative to AD8532ARMZ-REEL?
Yes. Use the product links or RFQ actions on this page to request pricing, availability, documentation, and sourcing support for any listed alternative part.
Is AD8532ARMZ-REEL obsolete, and what replacement should buyers review first?
Check the lifecycle row on this page first. If buyers need a fast starting point, the strongest mapped replacement currently surfaced here is , followed by the other alternatives shown in the comparison table.
Engineering support
Need help validating the replacement path?
If your team is unsure whether a mapped alternative to AD8532ARMZ-REEL from Analog Devices Inc./Maxim Integrated is really usable, contact us for help on package fit, pin compatibility, key parameter gaps, and qualification-facing review questions.
Contact a hardware engineer
Email our engineering support contact at [email protected], or use the contact page if the question should be routed across sourcing, engineering, and support.
developer_board
Package and pin compatibility
Review whether the alternate path looks credible from package, footprint, and pin-level perspectives.
tune
Parameter and function gaps
Surface the electrical, interface, or application-fit questions that still need confirmation before approval.
task_alt
Qualification and approval prep
Organize the documentation, datasheet evidence, and validation checkpoints your internal team may still require.