What is a cross-reference page for LM6171BIN/NOPB?
This page groups mapped replacement options for LM6171BIN/NOPB so buyers and engineers can compare alternatives before requesting a quote or approving a substitute.
Alternative part analysis
LM6171BIN/NOPB replacements, alternatives, and cross reference
Compare mapped replacement and alternative options for LM6171BIN/NOPB, then verify package, specifications, and application fit before approval.
Compare LM6171BIN/NOPB against mapped replacement options
Review package, lifecycle, stock, and MOQ in one view
Move from engineering screening to RFQ without leaving the page
No mapped replacement parts yet
This product currently does not show a published cross-reference list. Use RFQ support if your team needs an alternative part review.
Specification view
Parameter Comparison Chart
A side-by-side view of the source part and its mapped alternatives so buyers and engineers can screen package, availability, lifecycle, and key descriptors before RFQ.
swipe Swipe or scroll horizontally to compare more part numbers
The left column stays visible so buyers can keep the spec label in view while scanning multiple alternatives.
| Parameter Comparison Chart | Current part LM6171BIN/NOPB Texas Instruments |
|---|---|
| Part Number | LM6171BIN/NOPB |
| Manufacturer | Texas Instruments |
| Category | Integrated Circuits (ICs) |
| Subcategory | Linear - Amplifiers - Instrumentation, Operational Amplifiers, Buffer Amplifiers |
| Package | DIP |
| Series | VIP™ III |
| Key Attributes | - |
| Description | IC OPAMP VFB 100MHZ 8DIP |
| Lifecycle | - |
| Stock | 53,061 |
| Available | 48,320 |
| Min Order | 1 |
| Datasheet | Request |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Amplifier Type | Voltage Feedback |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Number of Channels | 1 |
| Dual Supply Voltage | 9V |
| Frequency Compensation | YES |
| Micropower | NO |
| Programmable Power | NO |
| Unity Gain BW-Nom | 100000 kHz |
| Low-Offset | NO |
| Low-Bias | NO |
| Voltage - Input Offset | 1.5mV |
| Input Offset Current-Max (IIO) | 2μA |
| Bias Current-Max (IIB) @25C | 3μA |
| Average Bias Current-Max (IIB) | 3.5μA |
| Current - Input Bias | 1μA |
| Voltage Gain | 84dB |
| Voltage - Supply, Single/Dual (±) | 5.5V~34V ±2.75V~17V |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| RoHS Status | ROHS3 Compliant |
| REACH SVHC | No SVHC |
| HTSUS | 8542.33.0001 |
| ECCN Code | EAR99 |
| Part Status | Active |
| Mounting Type | Through Hole |
| REACH Status | REACH Unaffected |
| ECCN | EAR99 |
| Lead Free | Lead Free |
| Packaging | Tube |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Factory Lead Time | 6 Weeks |
| Operating Temperature | -40°C~85°C |
| Gain Bandwidth Product | 100MHz |
| Output Current per Channel | 116mA |
| Categories | Integrated Circuits (ICs) |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Manufacturer | Texas |
| Subcategory | Operational Amplifier |
| Sub-Categories | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Length | 9.81mm |
| Weight | 4.535924g |
| Number of Functions | 1 |
| Contact Plating | Tin |
| Radiation Hardening | No |
| Pbfree Code | yes |
| Mount | Through Hole |
| Number of Circuits | 1 |
| Technology | BIPOLAR |
| Number of Pins | 8 |
| Number of Terminations | 8 |
| Pin Count | 8 |
| Height | 5.08mm |
| Nominal Supply Current | 2.5mA |
| Input Offset Voltage (Vos) | 6mV |
| Width | 6.35mm |
| Terminal Pitch | 2.54mm |
| Thickness | 3.9mm |
| Common Mode Rejection Ratio | 75 dB |
| Bandwidth | 160MHz |
| Series | VIP™ III |
| Slew Rate | 3600V/μs |
| Manufacturer's Part No. | LM6171BIN/NOPB |
| Base Part Number | LM6171 |
| Output Current | 116mA |
| -3db Bandwidth | 62MHz |
| Actions |
Cross-reference FAQ
Replacement Part Questions
Short answers for teams reviewing LM6171BIN/NOPB replacement and equivalent-part options.
Does a mapped alternative mean a guaranteed drop-in replacement for LM6171BIN/NOPB?
Not automatically. Cross-reference mapping helps shortlist candidates, but package, electrical behavior, qualification scope, and approval rules still need to be checked before release.
Which parameters should teams compare first for LM6171BIN/NOPB alternatives?
Start with package, series, key attributes, lifecycle status, stock position, datasheet access, and the mapped pin-to-pin or cross-reference note. Then confirm application-specific requirements in the datasheet and RFQ stage.
Can I request a quote for an alternative to LM6171BIN/NOPB?
Yes. Use the product links or RFQ actions on this page to request pricing, availability, documentation, and sourcing support for any listed alternative part.
Is LM6171BIN/NOPB obsolete, and what replacement should buyers review first?
Check the lifecycle row on this page first. If buyers need a fast starting point, the strongest mapped replacement currently surfaced here is , followed by the other alternatives shown in the comparison table.
Engineering support
Need help validating the replacement path?
If your team is unsure whether a mapped alternative to LM6171BIN/NOPB from Texas Instruments is really usable, contact us for help on package fit, pin compatibility, key parameter gaps, and qualification-facing review questions.
Contact a hardware engineer
Email our engineering support contact at [email protected], or use the contact page if the question should be routed across sourcing, engineering, and support.
developer_board
Package and pin compatibility
Review whether the alternate path looks credible from package, footprint, and pin-level perspectives.
tune
Parameter and function gaps
Surface the electrical, interface, or application-fit questions that still need confirmation before approval.
task_alt
Qualification and approval prep
Organize the documentation, datasheet evidence, and validation checkpoints your internal team may still require.