What is a cross-reference page for LMV712TL/NOPB?
This page groups mapped replacement options for LMV712TL/NOPB so buyers and engineers can compare alternatives before requesting a quote or approving a substitute.
Alternative part analysis
LMV712TL/NOPB replacements, alternatives, and cross reference
Compare mapped replacement and alternative options for LMV712TL/NOPB, then verify package, specifications, and application fit before approval.
Compare LMV712TL/NOPB against mapped replacement options
Review package, lifecycle, stock, and MOQ in one view
Move from engineering screening to RFQ without leaving the page
No mapped replacement parts yet
This product currently does not show a published cross-reference list. Use RFQ support if your team needs an alternative part review.
Specification view
Parameter Comparison Chart
A side-by-side view of the source part and its mapped alternatives so buyers and engineers can screen package, availability, lifecycle, and key descriptors before RFQ.
swipe Swipe or scroll horizontally to compare more part numbers
The left column stays visible so buyers can keep the spec label in view while scanning multiple alternatives.
| Parameter Comparison Chart | Current part LMV712TL/NOPB Texas Instruments |
|---|---|
| Part Number | LMV712TL/NOPB |
| Manufacturer | Texas Instruments |
| Category | Integrated Circuits (ICs) |
| Subcategory | Linear - Amplifiers - Instrumentation, Operational Amplifiers, Buffer Amplifiers |
| Package | - |
| Series | - |
| Key Attributes | - |
| Description | IC OPAMP GP 5MHZ RRO 10DSBGA |
| Lifecycle | - |
| Stock | 173,405 |
| Available | 96,204 |
| Min Order | 1 |
| Datasheet | Request |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage - Input Offset | 400μV |
| Voltage Gain | 130dB |
| Unity Gain BW-Nom | 5000 kHz |
| Number of Channels | 2 |
| Frequency Compensation | YES |
| Amplifier Type | General Purpose |
| Low-Bias | YES |
| Micropower | NO |
| Supply Voltage Limit-Max | 6V |
| Programmable Power | NO |
| Low-Offset | NO |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Bias Current-Max (IIB) @25C | 0.000115μA |
| Average Bias Current-Max (IIB) | 0.00013μA |
| Current - Input Bias | 5.5pA |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| RoHS Status | ROHS3 Compliant |
| REACH SVHC | No SVHC |
| JESD-609 Code | e1 |
| HTSUS | 8542.33.0001 |
| ECCN Code | EAR99 |
| Part Status | Active |
| REACH Status | REACH Unaffected |
| ECCN | EAR99 |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Factory Lead Time | 6 Weeks |
| Packaging | Tape & Reel (TR) |
| Operating Temperature | -40°C~85°C |
| Bandwidth | 5MHz |
| Categories | Integrated Circuits (ICs) |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Manufacturer | Texas |
| Terminal Pitch | 0.5mm |
| Output Type | Rail-to-Rail |
| Subcategory | Operational Amplifier |
| Sub-Categories | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps |
| Technology | BICMOS |
| Terminal Form | BALL |
| Contact Plating | Copper, Silver, Tin |
| Packing Method | TR |
| Architecture | VOLTAGE-FEEDBACK |
| Width | 0m |
| Input Offset Voltage (Vos) | 7mV |
| Slew Rate | 5V/μs |
| Radiation Hardening | No |
| Mount | Surface Mount |
| Pbfree Code | yes |
| Number of Functions | 2 |
| Output Current per Channel | 50mA |
| Terminal Position | BOTTOM |
| Number of Pins | 10 |
| Number of Terminations | 10 |
| Pin Count | 10 |
| Output Current | 25mA |
| Common Mode Rejection Ratio | 50 dB |
| Length | 0m |
| Thickness | 360μm |
| Height | 675μm |
| Base Part Number | LMV712 |
| Nominal Supply Current | 1.22mA |
| Operating Supply Current | 1.17mA |
| Package / Case | 10-WFBGA |
| Manufacturer's Part No. | LMV712TL/NOPB |
| Actions |
Cross-reference FAQ
Replacement Part Questions
Short answers for teams reviewing LMV712TL/NOPB replacement and equivalent-part options.
Does a mapped alternative mean a guaranteed drop-in replacement for LMV712TL/NOPB?
Not automatically. Cross-reference mapping helps shortlist candidates, but package, electrical behavior, qualification scope, and approval rules still need to be checked before release.
Which parameters should teams compare first for LMV712TL/NOPB alternatives?
Start with package, series, key attributes, lifecycle status, stock position, datasheet access, and the mapped pin-to-pin or cross-reference note. Then confirm application-specific requirements in the datasheet and RFQ stage.
Can I request a quote for an alternative to LMV712TL/NOPB?
Yes. Use the product links or RFQ actions on this page to request pricing, availability, documentation, and sourcing support for any listed alternative part.
Is LMV712TL/NOPB obsolete, and what replacement should buyers review first?
Check the lifecycle row on this page first. If buyers need a fast starting point, the strongest mapped replacement currently surfaced here is , followed by the other alternatives shown in the comparison table.
Engineering support
Need help validating the replacement path?
If your team is unsure whether a mapped alternative to LMV712TL/NOPB from Texas Instruments is really usable, contact us for help on package fit, pin compatibility, key parameter gaps, and qualification-facing review questions.
Contact a hardware engineer
Email our engineering support contact at [email protected], or use the contact page if the question should be routed across sourcing, engineering, and support.
developer_board
Package and pin compatibility
Review whether the alternate path looks credible from package, footprint, and pin-level perspectives.
tune
Parameter and function gaps
Surface the electrical, interface, or application-fit questions that still need confirmation before approval.
task_alt
Qualification and approval prep
Organize the documentation, datasheet evidence, and validation checkpoints your internal team may still require.