What is a cross-reference page for LMV358IPWR?
This page groups mapped replacement options for LMV358IPWR so buyers and engineers can compare alternatives before requesting a quote or approving a substitute.
Alternative part analysis
LMV358IPWR replacements, alternatives, and cross reference
Compare mapped replacement and alternative options for LMV358IPWR, then verify package, specifications, and application fit before approval.
Compare LMV358IPWR against mapped replacement options
Review package, lifecycle, stock, and MOQ in one view
Move from engineering screening to RFQ without leaving the page
No mapped replacement parts yet
This product currently does not show a published cross-reference list. Use RFQ support if your team needs an alternative part review.
Specification view
Parameter Comparison Chart
A side-by-side view of the source part and its mapped alternatives so buyers and engineers can screen package, availability, lifecycle, and key descriptors before RFQ.
swipe Swipe or scroll horizontally to compare more part numbers
The left column stays visible so buyers can keep the spec label in view while scanning multiple alternatives.
| Parameter Comparison Chart | Current part LMV358IPWR Texas Instruments |
|---|---|
| Part Number | LMV358IPWR |
| Manufacturer | Texas Instruments |
| Category | Integrated Circuits (ICs) |
| Subcategory | Linear - Amplifiers - Instrumentation, Operational Amplifiers, Buffer Amplifiers |
| Package | TSSOP |
| Series | - |
| Key Attributes | - |
| Description | Op Amp Dual Low Voltage Amplifier R-R O/P 5.5V 8-Pin TSSOP T/R |
| Lifecycle | - |
| Stock | 99,141 |
| Available | 45,858 |
| Min Order | 1 |
| Datasheet | Request |
| Part Status | Active |
| REACH Status | REACH Unaffected |
| ECCN | EAR99 |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Factory Lead Time | 6 Weeks |
| Packaging | Cut Tape (CT) |
| Categories | Integrated Circuits (ICs) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Form | GULL WING |
| Operating Temperature | -40°C~125°C |
| Manufacturer | Texas |
| Width | 4.4mm |
| Terminal Pitch | 0.65mm |
| Output Type | Rail-to-Rail |
| Subcategory | Operational Amplifier |
| Sub-Categories | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps |
| Packing Method | TR |
| Architecture | VOLTAGE-FEEDBACK |
| Input Offset Voltage (Vos) | 7mV |
| Lifecycle Status | ACTIVE (Last Updated: 6 hours ago) |
| Slew Rate | 1V/μs |
| Nominal Supply Current | 440μA |
| Contact Plating | Gold |
| Radiation Hardening | No |
| Mount | Surface Mount |
| Pbfree Code | yes |
| Number of Functions | 2 |
| Technology | BIPOLAR |
| Number of Pins | 8 |
| Number of Terminations | 8 |
| Pin Count | 8 |
| Bandwidth | 1MHz |
| Length | 3mm |
| Thickness | 1mm |
| Height | 1.2mm |
| Supply Voltage | 2.7V |
| Common Mode Rejection Ratio | 50 dB |
| Output Current per Channel | 160mA |
| Output Current | 160mA |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Base Part Number | LMV358 |
| Manufacturer's Part No. | LMV358IPWR |
| Operating Supply Current | 210μA |
| Terminal Finish | Matte Tin (Sn) |
| Power Supplies | 3/5V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 100dB |
| Input Offset Current-Max (IIO) | 0.05μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Voltage - Input Offset | 1.7mV |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Number of Channels | 2 |
| Micropower | YES |
| Frequency Compensation | YES |
| Amplifier Type | General Purpose |
| Programmable Power | NO |
| Low-Offset | NO |
| Low-Bias | NO |
| Supply Voltage Limit-Max | 5.5V |
| Current - Input Bias | 15nA |
| JESD-609 Code | e3 |
| RoHS Status | ROHS3 Compliant |
| REACH SVHC | No SVHC |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| HTSUS | 8542.33.0001 |
| ECCN Code | EAR99 |
| Actions |
Cross-reference FAQ
Replacement Part Questions
Short answers for teams reviewing LMV358IPWR replacement and equivalent-part options.
Does a mapped alternative mean a guaranteed drop-in replacement for LMV358IPWR?
Not automatically. Cross-reference mapping helps shortlist candidates, but package, electrical behavior, qualification scope, and approval rules still need to be checked before release.
Which parameters should teams compare first for LMV358IPWR alternatives?
Start with package, series, key attributes, lifecycle status, stock position, datasheet access, and the mapped pin-to-pin or cross-reference note. Then confirm application-specific requirements in the datasheet and RFQ stage.
Can I request a quote for an alternative to LMV358IPWR?
Yes. Use the product links or RFQ actions on this page to request pricing, availability, documentation, and sourcing support for any listed alternative part.
Is LMV358IPWR obsolete, and what replacement should buyers review first?
Check the lifecycle row on this page first. If buyers need a fast starting point, the strongest mapped replacement currently surfaced here is , followed by the other alternatives shown in the comparison table.
Engineering support
Need help validating the replacement path?
If your team is unsure whether a mapped alternative to LMV358IPWR from Texas Instruments is really usable, contact us for help on package fit, pin compatibility, key parameter gaps, and qualification-facing review questions.
Contact a hardware engineer
Email our engineering support contact at [email protected], or use the contact page if the question should be routed across sourcing, engineering, and support.
developer_board
Package and pin compatibility
Review whether the alternate path looks credible from package, footprint, and pin-level perspectives.
tune
Parameter and function gaps
Surface the electrical, interface, or application-fit questions that still need confirmation before approval.
task_alt
Qualification and approval prep
Organize the documentation, datasheet evidence, and validation checkpoints your internal team may still require.