What is a cross-reference page for TL084ACDR?
This page groups mapped replacement options for TL084ACDR so buyers and engineers can compare alternatives before requesting a quote or approving a substitute.
Alternative part analysis
TL084ACDR replacements, alternatives, and cross reference
Compare mapped replacement and alternative options for TL084ACDR, then verify package, specifications, and application fit before approval.
Compare TL084ACDR against mapped replacement options
Review package, lifecycle, stock, and MOQ in one view
Move from engineering screening to RFQ without leaving the page
No mapped replacement parts yet
This product currently does not show a published cross-reference list. Use RFQ support if your team needs an alternative part review.
Specification view
Parameter Comparison Chart
A side-by-side view of the source part and its mapped alternatives so buyers and engineers can screen package, availability, lifecycle, and key descriptors before RFQ.
swipe Swipe or scroll horizontally to compare more part numbers
The left column stays visible so buyers can keep the spec label in view while scanning multiple alternatives.
| Parameter Comparison Chart | Current part TL084ACDR Texas Instruments |
|---|---|
| Part Number | TL084ACDR |
| Manufacturer | Texas Instruments |
| Category | Integrated Circuits (ICs) |
| Subcategory | Linear - Amplifiers - Instrumentation, Operational Amplifiers, Buffer Amplifiers |
| Package | 14SOIC |
| Series | - |
| Key Attributes | - |
| Description | IC OPAMP JFET 3MHZ 14SOIC |
| Lifecycle | - |
| Stock | 89,864 |
| Available | 83,547 |
| Min Order | 1 |
| Datasheet | Request |
| Part Status | Active |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Factory Lead Time | 6 Weeks |
| Packaging | Cut Tape (CT) |
| Categories | Integrated Circuits (ICs) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Form | GULL WING |
| Manufacturer | Texas |
| Width | 3.91mm |
| Height | 1.75mm |
| Length | 8.65mm |
| Subcategory | Operational Amplifier |
| Sub-Categories | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps |
| Packing Method | TR |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | 0°C~70°C |
| Bandwidth | 3MHz |
| Slew Rate | 13V/μs |
| Max Power Dissipation | 680mW |
| Base Part Number | TL084 |
| Contact Plating | Gold |
| Surface Mount | YES |
| Radiation Hardening | No |
| Pin Count | 14 |
| Number of Pins | 14 |
| Number of Terminations | 14 |
| Pbfree Code | yes |
| Supply Voltage | 15V |
| Technology | BIPOLAR |
| Terminal Pitch | 1.27mm |
| Number of Functions | 4 |
| Input Offset Voltage (Vos) | 6mV |
| Common Mode Rejection Ratio | 75 dB |
| Max Supply Voltage (AC) | 3000 kHz |
| Nominal Supply Current | 11.2mA |
| Power Dissipation | 680mW |
| Operating Supply Current | 1.4mA |
| Neg Supply Voltage-Min (Vsup) | 3MHz |
| Manufacturer's Part No. | TL084ACDR |
| RoHS Status | ROHS3 Compliant |
| REACH SVHC | No SVHC |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| JESD-609 Code | e4 |
| ECCN Code | EAR99 |
| Max I/O Voltage | 6mV |
| Amplifier Type | J-FET |
| Voltage - Input Offset | 3mV |
| Voltage - Supply, Single/Dual (±) | 7V~36V ±3.5V~18V |
| Current - Input Bias | 30pA |
| Power Supplies | +-15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Number of Channels | 4 |
| Dual Supply Voltage | 9V |
| Mode of Operation | NO |
| Number of Lines | VOLTAGE-FEEDBACK |
| Output Data Bus Width | 0.0002μA |
| Load\/Preset Input | NO |
| Count Direction | YES |
| Frequency (Max) | -18V |
| Total Dose | 1.58mm |
| Positive Input Voltage-Max | 18V |
| Diode Element Material | 0.002μA |
| Current - Input | YES |
| Nominal Gain Bandwidth Product | 106.02dB |
| Voltage - Clamping | NO |
| Average Bias Current-Max (IIB) | 0.007μA |
| Actions |
Cross-reference FAQ
Replacement Part Questions
Short answers for teams reviewing TL084ACDR replacement and equivalent-part options.
Does a mapped alternative mean a guaranteed drop-in replacement for TL084ACDR?
Not automatically. Cross-reference mapping helps shortlist candidates, but package, electrical behavior, qualification scope, and approval rules still need to be checked before release.
Which parameters should teams compare first for TL084ACDR alternatives?
Start with package, series, key attributes, lifecycle status, stock position, datasheet access, and the mapped pin-to-pin or cross-reference note. Then confirm application-specific requirements in the datasheet and RFQ stage.
Can I request a quote for an alternative to TL084ACDR?
Yes. Use the product links or RFQ actions on this page to request pricing, availability, documentation, and sourcing support for any listed alternative part.
Is TL084ACDR obsolete, and what replacement should buyers review first?
Check the lifecycle row on this page first. If buyers need a fast starting point, the strongest mapped replacement currently surfaced here is , followed by the other alternatives shown in the comparison table.
Engineering support
Need help validating the replacement path?
If your team is unsure whether a mapped alternative to TL084ACDR from Texas Instruments is really usable, contact us for help on package fit, pin compatibility, key parameter gaps, and qualification-facing review questions.
Contact a hardware engineer
Email our engineering support contact at [email protected], or use the contact page if the question should be routed across sourcing, engineering, and support.
developer_board
Package and pin compatibility
Review whether the alternate path looks credible from package, footprint, and pin-level perspectives.
tune
Parameter and function gaps
Surface the electrical, interface, or application-fit questions that still need confirmation before approval.
task_alt
Qualification and approval prep
Organize the documentation, datasheet evidence, and validation checkpoints your internal team may still require.