What is a cross-reference page for ADC124S051CIMM?
This page groups mapped replacement options for ADC124S051CIMM so buyers and engineers can compare alternatives before requesting a quote or approving a substitute.
Alternative part analysis
ADC124S051CIMM replacements, alternatives, and cross reference
Compare mapped replacement and alternative options for ADC124S051CIMM, then verify package, specifications, and application fit before approval.
Compare ADC124S051CIMM against mapped replacement options
Review package, lifecycle, stock, and MOQ in one view
Move from engineering screening to RFQ without leaving the page
No mapped replacement parts yet
This product currently does not show a published cross-reference list. Use RFQ support if your team needs an alternative part review.
Specification view
Parameter Comparison Chart
A side-by-side view of the source part and its mapped alternatives so buyers and engineers can screen package, availability, lifecycle, and key descriptors before RFQ.
swipe Swipe or scroll horizontally to compare more part numbers
The left column stays visible so buyers can keep the spec label in view while scanning multiple alternatives.
| Parameter Comparison Chart | Current part ADC124S051CIMM Texas Instruments |
|---|---|
| Part Number | ADC124S051CIMM |
| Manufacturer | Texas Instruments |
| Category | Integrated Circuits (ICs) |
| Subcategory | Data Acquisition - Analog to Digital Converters (ADC) |
| Package | MSOP |
| Series | - |
| Key Attributes | - |
| Description | IC ADC 12BIT 4CH 500KSPS 10MSOP |
| Lifecycle | - |
| Stock | 32,758 |
| Available | 50,405 |
| Min Order | 1 |
| Datasheet | Request |
| REACH Status | REACH Unaffected |
| ECCN | EAR99 |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Contact Plating | Lead, Tin |
| Operating Temperature | -40°C~85°C |
| Data Interface | SPI, DSP |
| Categories | Integrated Circuits (ICs) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Form | GULL WING |
| Reference Type | Supply |
| Interface | SPI, Serial |
| Technology | CMOS |
| Reach Compliance Code | not_compliant |
| Qualification Status | Not Qualified |
| Sub-Categories | Data Acquisition - Analog to Digital Converters (ADC) |
| Manufacturer | Texas |
| Subcategory | Analog to Digital Converters |
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Terminal Pitch | 0.5mm |
| Supply Voltage | 3V |
| Resolution | 1.5 B |
| Polarity | Unipolar |
| Voltage - Supply, Analog | 2.7V~5.25V |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Integral Nonlinearity (INL) | 1.1 LSB |
| Sampling Rate | 500 ksps |
| Voltage - Supply, Digital | 2.7V~5.25V |
| Number of Functions | 1 |
| Operating Supply Voltage | 5V |
| Min Supply Voltage | 2.7V |
| Pbfree Code | no |
| Number of Bits | 12 |
| Max Supply Voltage | 5.25V |
| Mount | Surface Mount |
| Reflow Temperature-Max (s) | NOT SPECIFIED |
| Length | 3mm |
| Width | 3mm |
| Number of Pins | 10 |
| Number of Terminations | 10 |
| Max Power Dissipation | 12.6mW |
| Height | 860μm |
| Pin Count | 10 |
| Conversion Rate | 500 ksps |
| Manufacturer's Part No. | ADC124S051CIMM |
| Base Part Number | ADC124S051 |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| RoHS Status | RoHS non-compliant |
| JESD-609 Code | e0 |
| HTSUS | 8542.39.0001 |
| ECCN Code | EAR99 |
| Input Type | Single Ended |
| Sampling Rate (Per Second) | 500k |
| Sample and Hold / Track and Hold | TRACK |
| Configuration | MUX-S/H-ADC |
| Linearity Error-Max (EL) | 0.0269% |
| Signal to Noise Ratio (SNR) | 72.5 dB |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Output Bit Code | BINARY |
| Number of A/D Converters | 1 |
| Number of Channels | 4 |
| Number of Elements | 1 |
| Supply Type | Single |
| Number of Analog In Channels | 4 |
| Power Consumption | 3mW |
| Actions |
Cross-reference FAQ
Replacement Part Questions
Short answers for teams reviewing ADC124S051CIMM replacement and equivalent-part options.
Does a mapped alternative mean a guaranteed drop-in replacement for ADC124S051CIMM?
Not automatically. Cross-reference mapping helps shortlist candidates, but package, electrical behavior, qualification scope, and approval rules still need to be checked before release.
Which parameters should teams compare first for ADC124S051CIMM alternatives?
Start with package, series, key attributes, lifecycle status, stock position, datasheet access, and the mapped pin-to-pin or cross-reference note. Then confirm application-specific requirements in the datasheet and RFQ stage.
Can I request a quote for an alternative to ADC124S051CIMM?
Yes. Use the product links or RFQ actions on this page to request pricing, availability, documentation, and sourcing support for any listed alternative part.
Is ADC124S051CIMM obsolete, and what replacement should buyers review first?
Check the lifecycle row on this page first. If buyers need a fast starting point, the strongest mapped replacement currently surfaced here is , followed by the other alternatives shown in the comparison table.
Engineering support
Need help validating the replacement path?
If your team is unsure whether a mapped alternative to ADC124S051CIMM from Texas Instruments is really usable, contact us for help on package fit, pin compatibility, key parameter gaps, and qualification-facing review questions.
Contact a hardware engineer
Email our engineering support contact at [email protected], or use the contact page if the question should be routed across sourcing, engineering, and support.
developer_board
Package and pin compatibility
Review whether the alternate path looks credible from package, footprint, and pin-level perspectives.
tune
Parameter and function gaps
Surface the electrical, interface, or application-fit questions that still need confirmation before approval.
task_alt
Qualification and approval prep
Organize the documentation, datasheet evidence, and validation checkpoints your internal team may still require.