What is a cross-reference page for TL064IDR?
This page groups mapped replacement options for TL064IDR so buyers and engineers can compare alternatives before requesting a quote or approving a substitute.
Alternative part analysis
TL064IDR pin to pin replacement, cross reference, and alternative parts
Use this page to compare verified pin-to-pin replacement options for TL064IDR, review cross-reference notes, and move faster from part risk to sourcing action.
Compare TL064IDR against mapped pin-to-pin replacement options
Review package, lifecycle, stock, and MOQ in one view
Move from engineering screening to RFQ without leaving the page
TL064IDR pin to pin replacementTL064IDR p2p replacementTL064IDR cross referenceTL064IDR replacementTL064IDR alternativeTL064IDR equivalent
No mapped replacement parts yet
This product currently does not show a published cross-reference list. Use RFQ support if your team needs an alternative part review.
Specification view
Parameter Comparison Chart
A side-by-side view of the source part and its mapped alternatives so buyers and engineers can screen package, availability, lifecycle, and key descriptors before RFQ.
swipe Swipe or scroll horizontally to compare more part numbers
The left column stays visible so buyers can keep the spec label in view while scanning multiple alternatives.
| Parameter Comparison Chart | Current part TL064IDR Texas Instruments |
|---|---|
| Part Number | TL064IDR |
| Manufacturer | Texas Instruments |
| Category | Integrated Circuits (ICs) |
| Subcategory | Linear - Amplifiers - Instrumentation, Operational Amplifiers, Buffer Amplifiers |
| Package | 14SOIC |
| Series | - |
| Key Attributes | - |
| Description | IC OPAMP JFET 1MHZ 14SOIC |
| Lifecycle | - |
| Stock | 113,943 |
| Available | 38,275 |
| Min Order | 1 |
| Datasheet | Request |
| Low-Offset | NO |
| Programmable Power | NO |
| Frequency Compensation | Yes |
| Micropower | Yes |
| Low-Bias | Yes |
| Number of Channels | 4 |
| Nominal Gain Bandwidth Product | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Dual Supply Voltage | 9V |
| Terminal Finish | Matte Tin (Sn) |
| Max I/O Voltage | 6mV |
| Unity Gain BW-Nom | 1000 kHz |
| Amplifier Type | J-FET |
| Voltage - Input Offset | 3mV |
| Voltage - Supply, Single/Dual (±) | 7V~36V ±3.5V~18V |
| Input Offset Current-Max (IIO) | 0.0001μA |
| Current - Input Bias | 30pA |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Average Bias Current-Max (IIB) | 0.02μA |
| Voltage Gain | 75.56dB |
| Power Supplies | +-15V |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| RoHS Status | ROHS3 Compliant |
| REACH SVHC | No SVHC |
| HTSUS | 8542.33.0001 |
| Part Status | Active |
| Radiation Hardening | NO |
| Contact Plating | Gold |
| Pbfree Code | Yes |
| Surface Mount | Yes |
| REACH Status | REACH Unaffected |
| ECCN | EAR99 |
| Number of Functions | 4 |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Number of Terminations | 14 |
| Number of Pins | 14 |
| Pin Count | 14 |
| Terminal Pitch | 1.27mm |
| Factory Lead Time | 6 Weeks |
| Thickness | 1.58mm |
| Series | - |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Bandwidth | 1MHz |
| Categories | Integrated Circuits (ICs) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Form | GULL WING |
| Supply Voltage | 15V |
| Manufacturer | Texas |
| Technology | Bipolar |
| Operating Supply Voltage | 18V |
| Width | 3.91mm |
| Height | 1.75mm |
| Common Mode Rejection Ratio | 80 dB |
| Max Power Dissipation | 30mW |
| Length | 8.65mm |
| Subcategory | Operational Amplifier |
| Sub-Categories | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps |
| Operating Supply Current | 200μA |
| Packing Method | TR |
| Architecture | VOLTAGE-FEEDBACK |
| Input Offset Voltage (Vos) | 6mV |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Nominal Supply Current | 1mA |
| Quiescent Current | 250mA |
| Manufacturer's Part No. | TL064IDR |
| Base Part Number | TL064 |
| Slew Rate | 3.5V/μs |
| Actions |
Cross-reference FAQ
Replacement Part Questions
Short answers for teams reviewing TL064IDR replacement and equivalent-part options.
Does a mapped alternative mean a guaranteed drop-in replacement for TL064IDR?
Not automatically. Cross-reference mapping helps shortlist candidates, but package, electrical behavior, qualification scope, and approval rules still need to be checked before release.
Which parameters should teams compare first for TL064IDR alternatives?
Start with package, series, key attributes, lifecycle status, stock position, datasheet access, and the mapped pin-to-pin or cross-reference note. Then confirm application-specific requirements in the datasheet and RFQ stage.
Can I request a quote for an alternative to TL064IDR?
Yes. Use the product links or RFQ actions on this page to request pricing, availability, documentation, and sourcing support for any listed alternative part.
Is TL064IDR obsolete, and what replacement should buyers review first?
Check the lifecycle row on this page first. If buyers need a fast starting point, the strongest mapped replacement currently surfaced here is , followed by the other alternatives shown in the comparison table.
Engineering support
Need help validating the replacement path?
If your team is unsure whether a mapped alternative to TL064IDR from Texas Instruments is really usable, contact us for help on package fit, pin compatibility, key parameter gaps, and qualification-facing review questions.
Contact a hardware engineer
Email our engineering support contact at [email protected], or use the contact page if the question should be routed across sourcing, engineering, and support.
developer_board
Package and pin compatibility
Review whether the alternate path looks credible from package, footprint, and pin-level perspectives.
tune
Parameter and function gaps
Surface the electrical, interface, or application-fit questions that still need confirmation before approval.
task_alt
Qualification and approval prep
Organize the documentation, datasheet evidence, and validation checkpoints your internal team may still require.